Its all fine. Have you ever used your parking lights? They are your DRL and the rear position lights...This documents says Leuchte2SL VLB10 is Parking Light but this is the place where we change DRL options. Is it true or what?
Its all fine. Have you ever used your parking lights? They are your DRL and the rear position lights...This documents says Leuchte2SL VLB10 is Parking Light but this is the place where we change DRL options. Is it true or what?
This documents says Leuchte2SL VLB10 is Parking Light but this is the place where we change DRL options. Is it true or what?
Practically no. I use my all light settings in AUTO so I don't know the difference.Its all fine. Have you ever used your parking lights? They are your DRL and the rear position lights...
Practically no. I use my all light settings in AUTO so I don't know the difference.
So Parking Lights means DRL+Rear LED's right?
My Rear LED'S are always on, so there is no difference with only DRL and parking Lights.
I found an idea to work on it: Closing all front lights(DRL and XENON's) when you open your high beams for once(Not high beams on, when you just shutter)
So here is my first try out:
(8)-Leuchte10SHUTTER LB23-Lichtfunktion C 10 Fernlicht links
(9)-Leuchte10SHUTTER LB23-Lichtfunktion D 10 not active
(10)-Leuchte10SHUTTER LB23-Dimmwert CD 10 0
(11)-Leuchte10SHUTTER LB23-Dimming Direction CD 10 minimize
I did not try but it may work for left XENON's to shut down when you shutter your high beam's once.
Has anyone successfully coded the function that tells you how much fuel is left in the tank?
Parking Lights are intended to mark the outer perimeter of the vehicle while parked, ignition off in an unlit or foggy area.
Usage: A parking light will come on if you move the turn signal lever while the ignition is switched off.
The front your car will use the Day Light Running light of the selected side as it's parking light and at the same time, to the rear of the car the top most line of brake light LED's will turn on.
I tried and failed as the current VCDS Label file is incomplete with Beta 15.3 and I did not fancy forcing the coding via the LCH for this mod.
These are the notes I have:
Liters to refuel
1. 17 - Instruments
2. Coding - 07
3. Long coding helper
4. Byte 10
5. Under where it says Binary replace what should be 00111010 with 01111010 or "3A" in byte 11 to 7A.
To activate parking lights I must switch light position to parking lights(located right side of AUTO), right?
I am not planning to use it but when my ignition is on and I am driving in AUTO light mode, that parking light logo illuminates, so what does it mean?
Byte 10 or Byte 11 ? I tried doing it from looking to Golf VII's codes but after doing it, it did not work for me.
Now I get it.I think you are confusing the meaning of parking lights. There is no position on the light switch for them as such. I guess the switch must be in Off / "0" or Auto. To then turn a parking light on you must first park the car / stop and turn off your engine. If you are parked on the left side of the road you can put the right parking light on to make sure other traffic can see your car by moving the indicator / turn lever to the right / or up. Your right side parking light will then be active (front and back) and you can lock / walk away from the car.
Is this what you believe parking lights to be?
Now I get it.
So here is something I don't know too.
As you know there is 4 different position in light switch: 0 - AUTO - 1'st - 2'nd (I don't know their exact names)
What is the difference between 0 and 1'st position?
2'nd position is the one for main beams.
0 = Lights Off
AUTO = DLR's On, Auto Lights and Wipers On
Side Lights = DLR's On (Dimmed) and interior Lights On
Dipped Beams = DLR's On (Dimmed), Interior Lights On and Head Lights On
*In the UK the DLR's are on in the 0 Position due to regulations.
Has anyone found a way to turn off the electromecanical handbrake without pressing the brake? I heard that in the A4 maybe? they were able to do it.
You can, if you accelerate slightly, then press the EPB button down, release the park brake.
Try that without seatbelt.
Anyone know what the security codes are for Module 3 ABS, I have tried the 2 in @DJAlex PDF 20103 and 40168 which are accepted but when I try to change "scan for seatbelt" it asks for the security code. I think de-activating this may allow us to move the car without having to put the seatbelt on.
Still loving this.
have you got a video of it indicating left or right, really liking the look of this
Here you go
ive done it, and it works as yours does but ive got a fault code that 09 central electrics are incorrectly coded. if i clear the code it comes straight back but the lights worl as intended.
Have you got the fault code on yours too?
It's a weird one, tried the clear all, comes straight back up. Changed it back to how it was, no fault !
Trying installing the new Beta, can be installed alongside normal versions, and test again. This has worked for a few other mods which were causing issues. However I see that you have a 2015 car. Maybe something has changed firmware or hardware wise as this seems to work ok on 2014 cars.I think it's 14.12
Is there any way to restore default settings of Adaptations?(Especially 09 channel)
I did not backup from Applications and now I can not go back.