Would these S4 Alloys fit onto an A3?

[caraudiaye3]

As title:


OEM AUDI S4 WHEEL FACTORY ORIGINAL RIM 58810 C5G 8E0601025AL | OEM Wheels

Have a set second hand available to buy. Are these the same as the S3 wheels as they say S4 and dont have an 8P part number?

Cheers

 

[NHN]

Look S3 to me.

 

[caraudiaye3]

Part number: 8E0601025AL
Offset 45
8Jx18
5x112


Are these too wide for an A3?

 

[TDI140]

There s3 wheels mate might be reps or might be oem, but they will fit perfectly fine 100%

 

[caraudiaye3]

They are wider than S3 rims and have a different offset as they are from an S4 no?

Am curious as to how they will fit and look but dont have much time off to go and browse them and try them on...

 

[TDI140]

Not off an s4 pal im pretty sure s4 had different rims, unless they are upgrade rims for an s4

 

[leeds2592]

They're not common but pretty sure some S4's did have these on around 2006/2007ish time.

OP, have a look at the following link, although not the same wheels, they're the same spec (only difference is the offset is 43 rather than 45 you're looking at). They fit spot on and the A3 wheels should of come in this spec as standard IMO.

http://www.audi-sport.net/vb/a3-s3-sportback-8p-chassis/127347-synchromeshs-a3.html

 

[poli84]

They were available on B7 S4's.
I think they will fit perfectly fine on an 8P.

I ran ET43 18x8 on my old 8P, lowered about an inch, i had rubbing on 235's but clean driving on 225s.

 

[MartayMcFly]

S3 was 7.5J ET56, but yeah those will fit fine with 225 tyres, you might even get away with 235 as they're 18".

 

[Lee23]

iv got 18" 8J et 42 BBS LM's with 225/40 tyres and they fit perfect iv even put small spacers on the back n looks great.