Search results for query: *

Bump help please :S

Sorry behind the heatshield on the firewall, didn't think there was any air hoses behind there??

Yea checked all the hoses, and by heatshield do you mean all the wrapping over the hoses??

The car has been running really good for a while too now this, right basically I think the car went into limp mode on me last night it was acting really funny in my opinion prior to this where you heard the turbo sucking and dumping as it should but the power felt down, thought it just might...

I moved coup pack 2 to 3 cleared the codes that where in there and drove it but the code hasn't come back, still doing it though but it seems to be constant now at the same revs regardless of throttle position, don't think it was driven for long enough though so when I drive to work tomorrow ill...

It's a BAM engine on an 02 plate, reckon faulty coil pack isir? It's only under full throttle really starts at about 2.8k at full throttle where I'm guessing its at full boost, I haven't got a PCV valve, n249 is bypassed so a lot of vacuum hoses are gone, whenever I've had a split hose on other...

Wondering if anyone can help having problems with the s3 boost or fuel cut problems when I put my foot down, the obd reader I have has given me the codes 16684 & 16686 also I have a readiness test which is telling me that the catalyst, EVAP sys, and O2 sensor are failing any help would be much...

DUAL MASS FLYWHEEL CLUTCH KIT AUDI A3 (8L) S3 224 01 03 PDMFK10005 | eBay here's another link to the same product, I know I read a couple and got way to confused there was no definitive answer, was with the SMF and the DMF and is it essential to change the flywheel too?? The car has done over...

DUAL MASS FLYWHEEL CLUTCH KIT AUDI A3 (8L) S3 224 01>03 PDMFK10005 http://bit.ly/YzJcQo Bin looking at the kit on eBay, just wondering if anyone has an opinion on it wether it will be alright, think the kit supplies the clutch cover, clutch plate, release bearing and DMF just wondering what...

Yea I know its naughty, all my pipes where blocked, split and doing more harm than good, that's why I've done what I have done for the minute untill I get a catch can, basically what I have done for the minute then should be given very little if not no pressure build up, nothing to force oil...

Can doing a pcv delete cause too much pressure cause there isn't a vacuum source, my rocker cover is leaking again and I don't know wether me not having a pcv is cause to much pressure an forcing the oil out? At the minute I don't have a catch can cause I haven't purchased one but the principle...

Right b5 TIP ordered hope its worth it compared to the forge set up, once its here and on the car I will be selling the forge tip, for anyone who is interested pm me ill get some pics up of the fitting aswell :P

I was thinking TIP, but have just been curious as to wether it will make that much of a difference over the forge set up, I'm going to keep the air filter I currently have on there at the minute which is a apexi with the internal cone that directs airflow into the pipe, everyone on here seems to...

Just recently fitted my "welly cooler" and I must say lower down torque seems loads better an seems to hit boost alot earlier and hold it well but waiting till my boost gauge arrives to find out for certain :P got some money now and I'm in two minds wether to buy a relentless 3" downpipe £240...

Volkswagen VW Audi Skoda Aluminium Oil Sump Sealant Sealer Seal DIRKO ELRING | eBay this was the sealant I was thinking of getting?? Is this one ok?? Or any other recommendations? Only use it on the 4 transition points?? The cam seal seems fine, no oil running from underneath the cam seal, just...

I was in two minds wether to put a line of sealant all the way around the head, and then all over the gasket the first time i did it, but alot of people on here say not to do that only put some in the areas it states. Yea I added some sealer, to the transition points on either end of the head...

​my rocker cover gasket is still leaking!!! This is the second time I have changed it, and the second time I took my time made sure that there where no burs, the surfaces where completely flat, and sprayed the rocker cover, i was under the impression that i had done a good job it's leaking...

Hey guys, going to be doing a oil change soon, and though to do a gearbox oil change aswel, guna leave the rear diff and just do the front , just have a few questions, are the drain plugs on the gearbox magnetic as standard?? Are there two drain bolts on the front and one filler hole?? Also was...

If you ain't using any water, id say breather system, have you got any build up on dipstick or oil in water or other way around?? Cause the breather systems on the engine ain't the best, and ill bet that if you take the Breather pipe off that will probably be clogged up, the weather doesn't help...

Bump :S