Hi can you show me a pic I had sane issue with running a cable through body but still managed
Have you Tried a coat hanger mate . That looks very tight.
Not sure if it will go through , the wiring is attached to a to a unit and that is clipped into the body
If you have a coat hanger mate at least you will have tried also Google it. Someone will have had same issue as you
I’ve an idea for retro fitting puddle lights , I have a cable that I am using to power the footwell lights ( tapped into he dome light ,I’m now going to tap into that wire and run a cable from it to the puddle lights I’ve ordered
Trying to avoid vcds as there is no one locally that can do it, not sure mine has the modules as this will be a complete retrofit, I’ll have to cut the space for the units
I retro fitted footwell lights ( ran a cable from the dome light to the footwells and added a led strip so I’ll tap into that and run wires into each door
It’s not going to work without the vcds is it ?
Have you checked out the Vcd's map as there heaps off our lads in Ireland . Where in ireland are you
Feel your pain mate there is a few in the North Roscommon is the closest member to you.
Aye you could be right but only trying to save you a big wiring job . Best doing it the door card way then just get the activated when out for a Drive .Be easier to go to birmingham
Appreciate that, going to try and It the simple way and then invest in a vcds laptop to do it properly !! , there will be plenty more questions and queries !! So be preparedAye you could be right but only trying to save you a big wiring job . Best doing it the door card way then just get the activated when out for a Drive .
