My B8 build plans ..??..

I think it will happen this year Chop.
How did you cut your vents in Chop? Drill corners & jigsaw ?
 
  • Like
Reactions: Chop.
Was just gona ask if you were doing it yourself :)

Yeh a really good drill bit and a battery hacksaw I'll get a pic

IMG 4057


If I go for another one I'd use a grinder and a 1mm cutting disc as the drill and the jigsaw/hacksaw was a bit ruff and was lifting the edges a bit but my vents have a good lip on them to hide the ruff bits, a 1mm disc in a 4 or 5 inch grinder will cut it like butter

Also lucky mine lined up with the single skinned parts of the bonnet the double skinned support parts will be more tricky
 
  • Like
Reactions: xpoweruk
Cheers Chop,will be nerve shattering day when I do it i imagine :)
I can touch up the edges with my dremel I once the main cut is done.I'm weary of using a large grinder as it may burn the surrounding pint
 
  • Like
Reactions: Chop.
Yeh you would need to mask up the bonnet well round the section your cutting

Look forward to seeing it mate
 
  • Like
Reactions: xpoweruk
Re cutting out section for the duct moulding, if it's going into a section of the bonnet with an absence of stiffner pressing, the Bosch shear tool is the weapon of choice

There's no swarf ( with the exceptions of a starting drill hole - usually opened up with hand snips )
There's no heat or risk of paint damage and used correctly negligible distortion
If you have a sunroof installer nearby, pound to a penny they'll have one of those and may for a few beer tokens cut it out if you mark it up for them.
 

Attachments

  • IMG_5477.JPG
    IMG_5477.JPG
    819.9 KB · Views: 193
  • IMG_5478.JPG
    IMG_5478.JPG
    845.2 KB · Views: 193
I like it, from what I can remember though there's not much of the bonnet that's single skinned :-(
 
The bonnet has very few areas that are not covered in supporting structure,so a grinder or jigsaw will be the only option I think
$_3.JPG
 
  • Like
Reactions: Chop.
yeh just by luck I was on the outside middle single bits for mine

Mask it up with a heavy sheet and get the grinder out 1mm discs with nip though that no problem

Cut the supports out first from underneath in the area u choose so you only need to do one skin from the top ?
 
  • Like
Reactions: xpoweruk
xpoweruk said:
I'm considering adding a functional vent to the front 3rd of the bonnet :) (traditionalist please overt your eyes ;) )

GT500 hood vent,part number AR3Z16C630AA
hdsi14.jpg


Fitted to an S2000

gallery_100508_39266_478746.jpg
Click to expand...
Don't do it mate you've got a nice car I think it will look cheap. Just my opinion
xpoweruk said:
Oh & a 7PK1290 :)
Click to expand...


Sent from my XT1580 using Tapatalk
 
  • Like
Reactions: xpoweruk
pez81 said:
Don't do it mate you've got a nice car I think it will look cheap. Just my opinion



Sent from my XT1580 using Tapatalk
Click to expand...

It is being done for functionality,the hot air will be pulled out once travelling
 
xpoweruk said:
It is being done for functionality,the hot air will be pulled out once travelling
Click to expand...
You're braver than I am. Why not get an uprated cooler and meth kit?

Sent from my XT1580 using Tapatalk
 
pez81 said:
You're braver than I am. Why not get an uprated cooler and meth kit?

Sent from my XT1580 using Tapatalk
Click to expand...

Already got an upgraded cooler,but not so keen on meth with the chargers coating being sensitive to it
 
xpoweruk said:
Already got an upgraded cooler,but not so keen on meth with the chargers coating being sensitive to it
Click to expand...
Thought meth spray was for the intake? Be honest it's a bit advanced for me.


Sent from my XT1580 using Tapatalk
 
pez81 said:
Thought meth spray was for the intake? Be honest it's a bit advanced for me.


Sent from my XT1580 using Tapatalk
Click to expand...

The usual set up goes via the intake through the charger to the engine,you can do direct port but it negates the cooling some what i think
 
Another conteneder for the vent

GT3 bumper vent
E90.jpg
 
A bit of wool tuft aero testing for bonnet vent placement





It looks like the vest area will be where the full line of tufts are in the vid (red box in below pic)
No real surprise,but worth doing a wee test :)

3
 
  • Like
Reactions: RS5 JON, TechNick and Chop.
Me too mate,I think it's just the right size/look for the job :)
 
  • Like
Reactions: Chop.
Looks spot on, iv already been on the web site for a look
 
  • Like
Reactions: xpoweruk
I changed the interior trim from red dipped to re 2x2 twill fabric today.
It's so easy using this fabric,I think it could be done in 45 mins

PHOTO 20170211 150129
PHOTO 20170211 150142
PHOTO 20170211 150155
PHOTO 20170211 150202
 
  • Like
Reactions: kwstantinosk89, RS5 JON, James.B8 and 2 others
Cheers all,I love the new look :)

@TechNick I removed the trim as it only takes seconds to pop off the doors & dash.
The centre console & speedo trims are black so I didn't touch those (yet)
 
  • Like
Reactions: TechNick
Or maybe a reverse bonnet scoop ? (less chance of water ingress ? )

Scoop
S l1600
 
You won't believe this but I'm not too keen on them mate I like the other one better
 
  • Like
Reactions: xpoweruk
Just throwing ideas about Chop,I have also just discovered I have a Laser cutting service nearby who could potentially cut me a vent from aluminium sheet too.
I do quite like the reverse scoop idea though
 
  • Like
Reactions: Chop.
I hear that mate :)

Oh nice that might be a good shout

I enquired about an alloy vent some boy was fabricating in the states but he wouldn't post over here :-(
 
  • Like
Reactions: xpoweruk
I ordered an Isuzu Trooper bonnet scoop today.It was only £30 so no real loss if I don't like the look of it.Also ordered some Ibis white paint,white primer & clear coat
The size & shape seem perfect for my plans.

A few pics of the same scoop on an Astra rally car,I will fit it the other way around though (if i like the look of it )

2013 RallyBarbados 1
Astra 2013 May Lamppod
Astra 2013 May SideView
Astra 2013 RallyBarbados Loading2
 
  • Like
Reactions: Chop. and RS5 JON
Have you ordered the Rally spotlights too XP. :racer:

Pics of the scoop when fitted mate.

JG
 
  • Like
Reactions: Chop. and xpoweruk
Haha :) No spots just the scoop.

Pics will be posted when the vent is trial fitted prior to cutting :scared2:
 
  • Like
Reactions: RS5 JON and Chop.
Look forward to seeing it buddy

That Astra too ah the memory's of my youth
 
  • Like
Reactions: RS5 JON and xpoweruk
Scoop arrived today,so I offered it up to the bonnet

PHOTO 20170224 143039 PHOTO 20170224 143053 PHOTO 20170224 143120 PHOTO 20170224 155824 PHOTO 20170224 155835 PHOTO 20170224 155852 PHOTO 20170224 155906
 
  • Like
Reactions: Chop.
You must log in or register to reply here.

Similar threads

A4 geordie
Geordie's b8.5 a4 build (big plans)
Replies
9
Views
2K
James.B8
James.B8
matt.russell
Matt's A4 B8 Build Thread
Replies
14
Views
4K
matt.russell
matt.russell
Turbo jay
My b8 dynamik
Replies
12
Views
1K
Turbo jay
Turbo jay
Djwoody
My first B8...
Replies
15
Views
1K
Batman78
Batman78
F
My second B8 S4
Replies
37
Views
3K
jdp1962
jdp1962
Top
Back