arclight99
Registered User
- Joined
- Jan 14, 2016
- Messages
- 23
- Reaction score
- 0
- Points
- 1
Hi,
A3 8V 2.0 TDI Sportback.
I recently retrofitted the LED interior dome/reading lights to my car, as it did not have the Lighting Pack, so had only the cheapo halogen units!
I followed a 'How to' on the A1 forum, and the whole set up works fine, with the full functionality you would expect - until, that is, you start the engine.
Then after 5 seconds, the front and rear dome/reading lights all begin to pulse/flicker at about 2 per second, continuously, until you switch the engine off.
Do I need to go into the VCDS menu to enable/disable something?
Thanks in advance,
Arclight.
A3 8V 2.0 TDI Sportback.
I recently retrofitted the LED interior dome/reading lights to my car, as it did not have the Lighting Pack, so had only the cheapo halogen units!
I followed a 'How to' on the A1 forum, and the whole set up works fine, with the full functionality you would expect - until, that is, you start the engine.
Then after 5 seconds, the front and rear dome/reading lights all begin to pulse/flicker at about 2 per second, continuously, until you switch the engine off.
Do I need to go into the VCDS menu to enable/disable something?
Thanks in advance,
Arclight.