boost gauge

tony_a3

Registered User
Joined
Oct 13, 2014
Messages
76
Reaction score
13
Points
8
Hello ppl I fitted a new boost gauge on my audi and I got this red light on flashing all the time I wounder if it's cause is over boosting or something else any ideas???
 

Attachments

  • IMG-20141003-WA0004.jpeg
    IMG-20141003-WA0004.jpeg
    461.7 KB · Views: 120
Remove the gauge & see if the issue goes away.
 
Have you read the instructions, what level have you set the peak warning at ? Sounds to me like you have set it too low so the tell tale is saying it's over boosting. What spec is your car and somebody more knowledgeable than me will tell you what level of boost the car should be making.



Karl
 
  • Like
Reactions: tony_a3
Yes disconnect, if something fitted causes an issue, 1st fault analyse by removing to see if the issue goes away, then work from there.
 
Many thanks I'll try that today after I finish work ! I didn't set up nothing I got it delivered and installed on the car that's it ! I'll try to remove the reed light and set up the peak too
 
No probs, easy cheap fixes are the best. Learning point for the future read the instructions :)

Karl.
 

Similar threads

Replies
1
Views
579
Replies
35
Views
6K
Replies
3
Views
874