A6 S Line Avant 2.0TDI (BRE) - assistance needed to decypher VCDS 'error'

hi... i'm a newbie and as as you may notice this is my first post. Hopefully i will be in position to add more value in the future for someone else's issues rather than my own ones but here it is ...

i did quick scan on my car over the weekend and it returned an error related to battery regulator. i do not use car very often (Weekends mainly) and do notice that after couple days of non starting it is struggling to 'turn on'. I checked the battery at several places and they advised that it is fine... however when plugged to VCDS it reports an error. So... Has anyone got any hints on how to 'interpret' this error for better terms so as to determine what is wrong with the car that relevant part can be ordered/rectified? i also did some detailed assessment of the battery and have attached those too.

Any assistance is welcomed...

Saturday,31,May,2014,15:05:46:62939
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: Release 12.12.0 (x64)
Data version: 20130910








Address 61: Battery Regul. Labels: 4F0-910-181.lbl
Control Module Part Number: 4F0 910 181 F HW: 4F0 915 181 B
Component and/or Version: J0644 BEM H13 0760
Software Coding:
Work Shop Code: WSC 04008 758 999999
Additional Info: 4F0915105D von VA0 2712110813
Additional Info: Geraet 999999
VCID: 24470A1BE72E243ED0B-8071
4 Faults Found:


02273 - Quiescent Current Stage 2
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 3
Reset counter: 255
Time Indication: 0
Date: 2014.01.05
Time: 17:11:03


02479 - Partial Consumer Shut-Off Active
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 255
Reset counter: 255
Time Indication: 0
Date: 2012.11.29
Time: 17:57:51


02272 - Quiescent Current Stage 1
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 40
Reset counter: 255
Time Indication: 0
Date: 2012.12.12
Time: 14:46:49


02274 - Quiescent Current Stage 3
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 9
Reset counter: 255
Time Indication: 0
Date: 2012.12.19
Time: 21:52:00



Many thanks... Dan

Thx for prompt response... I bought the vehicle 7-8months ago and the mileage is on the high side - 156k bit with comprehensive Audi history (checked and validated with Audi UK). It is a 2008/57 plate... Q: how do I find out coding on the batt. Regulator?

Ps. Will drop you MMI info tomorrow morning.

where would I find this information?

"MMI system and software and the coding on the battery Regulator"

hi guys,

I did re-run the scan on VCDS (following a batt. replacement) and I get the same set of errors as I mentioned in my original post... needless to say that my vehicle didn't want to start on disembarking the ferry in Calais (and with new battery). Considering I had driven it for 3h+ prior to it I think that battery is not an issue.

Now I bet that either a some regulator/relay needs replacement so if anyone can shed some lights that would be great? or even better if anyone know how to relate above mentioned error and translate to a required part even better ?


cheers

stock Audi 110Ah batt. (made by Varta)... it was a simple swap out, old one out -> new one - in.

I also noticed that everything worked right away and no issues with electrics and no coding of radio/MMI required. Is that 'typical experience'?