s3 quick question

[S.]

quick question: does your rev needle stay right at the 800rpm (where it should be) or it goes little bit higer or lower (for a needle width)? is this thing normal?
thanks for help

 

[dc240969]

mine goes to zero when l switch the motor off and away up to 7000 when l floor it. But at idle its usually about 800-900

 

[warren_S5]

nature of the beast. Despite the electronic idle stabilization function you will get a slight deviation in revs whilst at idle. It's vastly improved from 10+ years ago where cars of this nature would have seen quite some fluctuation.

Completely normal, and if you mod it you may see a scrap more movement.

 

[S.]

mine goes to zero when l switch the motor off and away up to 7000 when l floor it. But at idle its usually about 800-900

funny guy :icon_thumright: mine goes 7200 when i floor it
thanks warren

 

[Jono S3]

Perfectly normal, the ECU can ramp the idle up a bit to compensate for the aircon cutting in or the power steering taking extra power from the alternator.