S3RYE
Interior Next!!
car is clean, but still have bug remains baked onto the whole front end. anyone got any good ways to get this stuf off? its almost like glue and ive tried bug removing sprays (for cars) and there shi*
what do u do to your cars start to finish.. ???(not interior)
A proper clean would be:
Pre wash with snow foam using foam lance and pressure washer.
Rinse
Wash with Megs Gold Class and Microfibre wash mitt.
Rinse.
Clay bar
Wash
Rinse
Polish with AG Ultra Deep Shine
Seal with AG Extra Gloss Protection
Tyres dressed with Megs hot shine
Rainx foaming glass cleaner
RainX repellant
Wax (currently using FK pink wax)
If it's a quick wash, it's just a case of the first 4 stages ^
Ok, so the AG tar remover got rid of the bugs!
bought the ultra deep shine and extra gloss protection, didnt get a chance to do the sealant but did the polish and wow! looks great!! just gotta get my foam lance and snow foam n im away! cheers for advice matey
Nice one. Get that EGP on, it really gives a nice finish. Plus, you need it on if you've polished as you've effectively stripped any protection off the car. Get the EGP on and you've sealed in your hard work, which will make the car easier to clean. I'd top that with a wax too.
I hate to be the bearer of bad news but you'll soon be wanting to try various other polishes, sealants, glazes, waxes etc. You'll end up with loads of half empty bottles! It's a expensive game, I tell you!!
I hate to be the bearer of bad news but you'll soon be wanting to try various other polishes, sealants, glazes, waxes etc. You'll end up with loads of half empty bottles! It's a expensive game, I tell you!!
omg! u have scared me now... i did it yesterday so i can do the sealant but it says to leave it for a good hour... is this the case? and will it be ok to do considering i cleaned her yesterday???
omg! u have scared me now... i did it yesterday so i can do the sealant but it says to leave it for a good hour... is this the case? and will it be ok to do considering i cleaned her yesterday???
its sorted the car was clean, i ran a micrfiber over lightly to get rid of any dust then applied egp.. im planning to wax it on the weekend.. shall i do both these stages again or will clean and wax be ok???
change of plan... ive decided.. i am going to order a foam lance and some snow foam... ive just read it gets rid of bug remains... i did get rid of most of them but not all and i have serious reservations about continuously using AG Intensive tar remover to do it! am worried what long term effects it could have..
so once i got my lance and foam.. ill go through the motions once again hopefully getting everything in this time.. so more likely to have pics up sunday week.. will keep u posted!