Last edited by a moderator:
clamps don't need to be so tight thats the plastic cracks mate, also dark side developments but a silicone bend on there intake pipe soit must be for a reason matePretty sure you've already posted this before, then you had the same comments as above and you deleted the thread.
waste of time unless you develop the pipe all the way to the inlet of the turbo. Plus your clamping plastic pipes with a mikalor clamp, which is made for EXHAUSTS and that probably doesn't help with cracking plastic pipes.
If it was needed it would have been developed by now.
Mounts are all fine so is tandem pump lines, when you move it it just splits so silicone is a way to improve this
clamps don't need to be so tight thats the plastic cracks mate, also dark side developments but a silicone bend on there intake pipe soit must be for a reason mate
2.0 TDi BKD (PD140) Airbox to TIP Silicone Hose - Darkside Developments
no one is forcing youI wasn't aware of the dark side one, anyway dark side one looks much better and is cheaper.
Thats all I can say tbh, but I don't believe I will ever be purchasing one of these pointless things either from yourself or darkside no matter what it looks like.