Well i always wanted a auto dim mirror all on fleabay are cream and overpriced,so i got hold of this from a bora,took all i wanted including mirror,fixings,loom,relays ect,comes with auto wiper rain sensor that i will wire in but not fit as of yet,so ive done a mini retro fitting guide.
First is the button on the screen that attaches the original mirror,its a different fitting and i know if i try to remove it it will crack the glass,other option is to buy a new later screen...but not yet
Original twist fit mirror below,auto dim on top.
original non dim mirror button.
The Auto dim mirror has a 20mm hole in the center for the auto wiper option,for now im wiring it in but not fitting it unless i change screens,so it will be in the glove box if need be,the auto dim button fits nicely over the original button,so i bonded it on.
Few ours later...
view from the rear..
Next was the wiring,i took no shots sorry,but it soldered the blue/black wire into fuse 5 and gave it and earth,the reveres option i left off,the wiper wiring i wired into the back of the wiper relay and all done.
The original mirror sits higher than auto dim mirror,so the tube that runs the wires through needs to be trimmed down.
Before trimming.
and after...
Then just slot the mirror in place,connect the plug,fit covers and your all done.
still need to order the lower trims so please ignore..
So if i ever change the screen for an later auto dim mirror type all i have to do is pop the rain sensor in place,plug the wiring in and done....probably never happen lol