B6 is the same as B7 so a direct fitI doubt it very much... although the B6 is similar to the B7 in many ways the B8 is a totally different shape...
well took the plunge and decided i was not going to be paying £200 plus so removed mine and painted it
6 large cans of matt black from halfords and away we go
results
i must admit i am more than happy with the outcome just need some leds for my interior lights now
cheers fella ,
used 4 large cans of matt black to do the roof and side pillars and two tins of halfords plastic and vinyl paint to do the hard plastics , cost me around £40 with my trade card a lot cheaper than the £200 plus vat prices i was quoted for second hand replacements , just dont rush it mate lots of fine coats are better results than thick ones ,think the large roof panel took six coats to cover , the hardest panel to remove is the rear c pillar as you have to remove back seat to access the popper holding it down at the bottom.when painting this panel mask the black plastic at the bottom or it will react with the paint i know mine did .
the b pillar with seat belt sliders come apart very easy to paint bits individually
no mate fixed rear seats ,remove rear seat and all roof trims push front seats fully forward and wind them as low as they will go and recline backs as far down as possible ,then carefully pull tab down in centre of rear roof lining then it will drop down with a bit of twisting and wiggling the roof lining will come out of the back door .