Yip, my first attempt at wrapping. The door blades were easy, the front grill is a bit more challenging. You need to be patient. I think the rear bumper will be easy as its all flat. Will need to remove the reverse sensors.
Some tips,
Always cut more than you need, you can always trim the excess off.
If you do the lower front grill, start on the top and work your way to the bottom, don't do the top then the bottom and then try the centre. The material won't be able to stretch that much and will start to tear in the corners when you heat it up.
I ordered 500mm X 2metre , but would suggest getting extra for trial and error.
Pics to follow once fitted.