Think you should leave it black n do small red detailing like paint the inside of the X on the inlet manifold.
Not saying until the pics of the manifold 'build' have been posted
<tuffty/>
Think you should leave it black n do small red detailing like paint the inside of the X on the inlet manifold.
Manifold is looking good, The Excessive manifolds are very tight when it comes to the fitting of a silicone hose or pipe from the T/B to map sensor pipe
I'm still thinking about making these but it all comes down to time and weather Excessive can do me a deal on the parts in bulk
Cheers mate I've had to manipulate the coolant pipes a bit to clear the underside of the r32 tb but will all have more clearance once I get an oil cooler and get rid of 2 pipes from under there
Definately think you should make them as there's not a lot on the Market besides sem anymore and they should definately flow a dam site better than the standard Mani
Turn the tb 90 degree so you can see the plug and the black plastic cover is facing down, there is a theory in that the air flows better to number 1-4 better that way
Go black wrinkle finish for the OEM+ look
my problem is too many/much colours, i just experiment when parts are off lol. i wish i had a black TIP i think now.
im changing mine soon to something dark and subtle.
but i think seeing as most of your stuff is black, red would look awesome against it all.
Anodising was another thing that has briefly crossed my mind?
anodising may not work on cast substrates... depends on material grade
Nice work mate... I am leaving making mine until I have finished re-doing my map...
<tuffty/>
Nice rack on the bird in the calendar. Inlet not bad either.
Mate, April is not the best month for weather normally. Sack the whole month off. I'm probably going to give the Edition38 show this weekend and the Ace Cafe meet a miss if the weather is going to continue like this.
Hayward did an e36 track car system for unit18 and the work was good. Just a shame yours was pap! BTB in daventry are good but it's a bit of a journey up there for you.
I was thinking of making these spacing rings to sit between the top km nut and spring out of aluminium unless anyones got other sugestions or reasons why not to?