audi a3 problem after car accident

C

controller

Registered User
Joined
Feb 9, 2012
Messages
4
Reaction score
0
Points
1
Location
NULL
hello
i have a light damaged Audi A3 2004 (BGU engine).. Car has light damaged front of it..The vehicle locked itself after car accident,
Airbags aren't open but seat belts locked and don't move. also, after start engine, the vehicle is stopping within 2 or 3 seconds and stopping to fire(ignite).
besides, it saying "Safe" on the vehicle's monitor. What i should do to fix this circumstance?

note: the vehicle gave "P1570" error. Ross-Tech: VAG-COM: Immobilizer 2 ECU Swapping i followed and performed steps where is on that site but it gave "vag-com licence" error..
 
i'm sorry about wrong section.. yes i borrowed to cabe from one of my friends.. 704.1 cable version. i'm not sure about cable's genuiue.
 
i will just buy 10.6.0 cable version, after this it will help me about it? i mean it can be fix?
 
controller said:
i will just buy 10.6.0 cable version, after this it will help me about it? i mean it can be fix?
Click to expand...

You need a genuine version of VCDS as the pirate ones don't work correctly.

It can be fix and then you will be excite. :icon_thumright:
 
  • Like
Reactions: OVRA3
sounds like the belt pretensioners have gone off.
wierd that it seems like an imobilizer fault. think you'll need some dealer help to recode it via their online to germany jobbie.
 
yup, there is definately a fault with immobilizer hence the words SAFE. A scan with a proper VCDS lead will let you know which part is causing the fault.
 
i appreciated for all answers..

vcds's scan log in the below:

Code: 
Friday,10,February,2012,13:00:50:36838
VCDS Version: Release 10.6.2
Data version: 20101123



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8L - Audi A3/S3
Scan: 01 02 03 08 15 16 17 22 35 37 45 55 56 57 75 76
 
VIN: WAUZZZ8P44A07****   
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 06A-906-033-BGU.lbl
   Part No: 06A 906 033 BC
   Component: SIMOS71 1.6l 2VG    5483  
   Revision: 00000003    Serial number: AUX7Z0C8F*****
   Coding: 0000075
   Shop #: WSC 06435 000 00000
   VCID: 61C2B900871*****

9 Faults Found:
18080 - Coolant Fan Control 1: Open or Short to Ground 
            P1672 -- 009 -- Open or Short to Ground - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Temperature: 7.5°C
                    Temperature: 7.5°C
                    Speed: 0.0 km/h
                    RPM: 0 /min
                    Temperature: 7.5°C
                    Temperature: 7.5°C
                    Speed: 0.0 km/h

17979 - Left Engine Mount Solenoid Valve (N144): Short to Plus 
            P1571 -- 008 -- Implausible Signal
             Freeze Frame:
                    RPM: 0 /min
                    Temperature: 7.5°C
                    Voltage: 11.53 V
                    Bin. Bits: 00000001
                    RPM: 0 /min
                    Temperature: 7.5°C
                    Voltage: 12.04 V
                    Bin. Bits: 00000001

18047 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal  
            P1639 -- 009 -- Open or Short to Ground - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Temperature: 7.5°C
                         0
                    Load: 8.6 %

16788 - EGR System: Range / Performance 
            P0404 -- 008 -- Implausible Signal - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Voltage: 11.12 V
                    Load: 0.0 %
                    Load: 0.0 %
                    RPM: 0 /min
                    Voltage: 0.00 V
                    Load: 0.0 %
                    Load: 0.0 %

17966 - Throttle Actuator (G186): Electrical Malfunction 
            P1558 -- 006 -- Short to Plus - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Bin. Bits: 00000001
                    Load: 100.0 %
                    Load: 0.0 %
                    RPM: 0 /min
                    Bin. Bits: 00000001
                    Load: 100.0 %
                    Load: 0.0 %

17585 - Bank2: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached 
            P1177 -- 007 -- Short to Ground - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Bin. Bits: 00000001
                    Load: 100.0 %
                    Load: 0.0 %
                    RPM: 0 /min
                    Bin. Bits: 00000001
                    Load: 100.0 %
                    Load: 0.0 %

17578 - Mass Air Flow Sensor 2 (G246): Supply Voltage 
            P1170 -- 007 -- Short to Ground - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Mass Air / Rev.: 0.0 mg/str
                    Absolute Pres.: 1005.5 mbar
                    Lambda: -1.0 %
                    RPM: 0 /min
                    Mass Air / Rev.: 0.0 mg/str
                    Absolute Pres.: 1026.8 mbar
                    Lambda: 1.0 %

16506 - Throttle Position Sensor (G69): Signal too Low 
            P0122 -- 009 -- Open or Short to Ground - MIL ON
             Freeze Frame:
                    Temperature: 4.5°C
                    Temperature: -40.5°C
                    Temperature: 4.5°C
                    RPM: 0 /min

18047 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal  
            P1639 -- 007 -- Short to Ground - Intermittent
             Freeze Frame:
                    RPM: 0 /min
                    Voltage: 11.73 V
                    Load: 14.5 %
                    Load: 0.0 %

Readiness: 1110 1101

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09G-927-750.lbl
   Part No: 09G 927 750 B
   Component: AQ 250 6F           0436  
   Coding: 0000008
   Shop #: WSC 06435 000 00000
   VCID: 30640C449C7*****

3 Faults Found:
01317 - Control Module in Instrument Cluster (J285) 
            004 -- No Signal/Communication - Intermittent - MIL ON
01315 - Transmission Control Module  
            013 -- Check DTC Memory - Intermittent - MIL ON
01693 - Valve for Throttle (N211) 
            008 -- Implausible Signal

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
   Part No: 1K0 907 379 D
   Component: ESP FRONT MK60      0102  
   Coding: 0051846
   Shop #: WSC 06435 000 00000
   VCID: 336E03486D6*****

10 Faults Found:
00810 - Sensor 1/2 for Brake Pressure 
            005 -- No or Incorrect Basic Setting / Adaptation - Intermittent
00779 - Outside Air Temp Sensor (G17) 
            005 -- No or Incorrect Basic Setting / Adaptation - Intermittent
01436 - Brake Fluid Level too Low 
            005 -- No or Incorrect Basic Setting / Adaptation - Intermittent
01048 - Diesel Electronic Warning Light (K104) 
            008 -- Implausible Signal - Intermittent
00488 - Right Rear Outside Door Handle Central Locking Button (E372)  
            004 -- No Signal/Communication - Intermittent
00783 - Positioning Motor; Left Rear (V78) 
            014 -- Defective - Intermittent
01329 - Convenience System Data Bus in Emergency Mode 
            004 -- No Signal/Communication - Intermittent
01320 - Control Module for Climatronic (J255) 
            004 -- No Signal/Communication - Intermittent
00674 - Release Brake Pedal 
            002 -- Lower Limit Exceeded - Intermittent
00286 - ABS Inlet/Outlet Valve; Rear Left (N139) 
            012 -- Electrical Fault in Circuit

Besides, when i enter to immobilizer's section from vcds there is an error "fault codes".. when i enter to there, i saw this one;

Code: 
Friday,10,February,2012,14:01:30:36838
VCDS Version: Release 10.6.2
Data version: 20101123


                Address 25: Immobilizer       Labels: 1K0-920-xxx-25.lbl
Control Module Part Number: 8P0 920 930 G    HW: 8P0 920 930 G
  Component and/or Version: KOMBIINSTR. VDO H25 0080
           Software Coding: 
            Work Shop Code: WSC 03501 389 *****
                      VCID: 36683A5C7E1*****
1 Fault Found:

02241 - Engine Control Module; Immobilizer Data not Adapted 
        000 --  -

and when i followed to this steps from here Ross-Tech: VAG-COM: Immobilizer 2 ECU Swapping, it's saying first part of
extra field is empty and the second one has "geraet 1030**".. i wonder electric not going to this section or it can be blowing of fuse?
 
You must log in or register to reply here.

Similar threads

K
Advice on car repair after accident
Replies
19
Views
2K
ADEY
ADEY
Ste-Martin
Car Accident
Replies
19
Views
1K
phil76
phil76
C
After lowering car problem
Replies
6
Views
1K
chunkerz
C
WelshWoody83
My Car Accident....
Replies
20
Views
2K
WelshWoody83
WelshWoody83
R
Problem after Problem
Replies
4
Views
736
fangio
F
Top
Back