Does anyone know how well 18"x 9" wheels with an et45 will fit on an S3. Currently the car is standard 4x4 height and will be lowered on coils soon. Am keen to know about turning, rubbing and any possible issues.
Wheel Width Advice
- Thread starter L1ARR
- Start date
Rich, the 9's may rub at the front. I just fitted some 19x8.5 et45 to mine and the front are close to flush. The rears are fine and I would say you would be ok with 9 at the back but 9 at the front may be close?
Have you found some RS's then?
Have you found some RS's then?
Forget that, I read it quickly and thought they were 19's.
What is Ian with the white s3 and supers running
What is Ian with the white s3 and supers running
- Joined
- Jul 4, 2007
- Messages
- 17,105
- Reaction score
- 719
- Points
- 113
- Location
- Salford, Manchester
- Website
- www.facebook.com
I thought the rears would be ok, it's the 9" on the front that concern me. Will these rub on lock to lock?
Ians have et42 front and back with spacers, I know he has done some arch work to tuck them in the arch.
Ians have et42 front and back with spacers, I know he has done some arch work to tuck them in the arch.
- Joined
- Jul 4, 2007
- Messages
- 17,105
- Reaction score
- 719
- Points
- 113
- Location
- Salford, Manchester
- Website
- www.facebook.com
- Joined
- Jul 4, 2007
- Messages
- 17,105
- Reaction score
- 719
- Points
- 113
- Location
- Salford, Manchester
- Website
- www.facebook.com
Sorry brother, should have mentioned. That was when I was running KW V2s lowered -65mm all the way round. Just bolt on, drive, look good 
