WHEEL FITMENTS

[stoakseya4]

Can anyone advise as to the correct fitment for alloys for the B6?

I think it's ET35, but am not sure.

Can ET40, 45 or even 50 work ? Basically have found some MTM wheels, but not with ET35, so not sure if they'll fit ?

Cheers !

 

[jase0851]

et 45 or 42 or 35 all fit. i am running 35, andyccr is runnin 32 and says he has no problems the lower the et the more the wheel fills the arch most popular aftermarket offset is 35

 

[Marko]

I think ET 43 or 45 is the standard Audi offset.

 

[stoakseya4]

Nice one cheers fellas...

 

[NOLOGY]

I RUN ET35 with 235/40/18 tires and its the proper setup i beleive for b6 for 18"

 

[stoakseya4]

Do you know if ET50 will fit ?!

 

[jase0851]

doubt it the offset is to high the wheels would be to close to the suspension

 

[stoakseya4]

Doh !

 

[Randomjim]

Easily cureable with spacers though

 

[stoakseya4]

So the spacers (what size?) will move the wheel further out into the arch (away from the car?).

Will they not start projecting out past the arch ?

 

[Randomjim]

You can get them as little as 3mm up to 80mm. If the wheels are ET50 i would suggest 15mm hubcentric spacers (they bolt to the hub so are a lot safer).

 

[stoakseya4]

Cheers, so the spacers just move the wheel further away from the car and fill the arch more?

Et50 should be fine then ?

 

[Randomjim]

Yup you got it.

 

[stoakseya4]

What would you recommend for spacers then? 10-15mm ??

 

[Randomjim]

I would have thought 10mm would be ok but they would look a lot better with 15mm's.