Oh yes and lets be quite clear, its not an estate car , its an avant...
What have you done to your Audi A4 B7 today?
- Thread starter Dani_B19
- Start date
@Just Rob. tbh avants look more like Kim Kardashian's bum - artificially enhanced and fugly 
Just kidding, they do look good but not as much as Saloons, which are more like a Size 10 model - just perfect, equally proportioned and unlike Kim
Just kidding, they do look good but not as much as Saloons, which are more like a Size 10 model - just perfect, equally proportioned and unlike Kim
Kim Kardashian , who's that then .......sounds like some unknown plank......
Personally for me the saloon doesnt look as good. Even with the little lip spoiler its ok. But the avant rear just works. As long as get sline or above. The spoiler makes or breaks a car sillouette for me
sun was out again , that's two days on the trot... great , so time for a pre winter check and clean etc....and then swapped alloys.
Self presents, they are the best ones, that way they are allways what we want.....nice work...
Got my car retuned with SA Tuning. He did a great job on the dyno. My old tune was pretty sub par and he’s remapped it very well. I still have some fueling issues I need to sort out but once that’s done he said he’ll finalize some things to improve it slightly.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Deleted airbag warning that came on fri morning. Drivers squib value incorrect. Blaming sudden cold snap for now. And fitted new ipod lead and hidden underneath center console to conpartment at side of handbrake
avant_karl
Registered User
- Joined
- Jul 17, 2015
- Messages
- 117
- Reaction score
- 62
- Points
- 28
Striped down and tinted the headlight insides
All put back together ready to refit sometime this / next weekend
Also polished the lenses.
All put back together ready to refit sometime this / next weekend
Also polished the lenses.
Is this a difficult task? Used to have to put old corsa one in low heat oven to open up?? Looks the businessStriped down and tinted the headlight insides
All put back together ready to refit sometime this / next weekend
Also polished the lenses.
avant_karl
Registered User
- Joined
- Jul 17, 2015
- Messages
- 117
- Reaction score
- 62
- Points
- 28
No Mate. Easy to split them! I used a heat gun as apposed to the oven - only a few minutes then pull the lense off!
I did by this pair as I wanted some with the he clear indicator lense and so I didn’t have to do it all in one day! I’ll fit these and stick mine up for sale.
Got my car retuned with SA Tuning. He did a great job on the dyno. My old tune was pretty sub par and he’s remapped it very well. I still have some fueling issues I need to sort out but once that’s done he said he’ll finalize some things to improve it slightly.
Sent from my iPhone using Tapatalk
Whats the spec on this mate
Here’s my build thread on a different forum. I’m just too lazy to list it all here.
Edgar's (i3oricua's) Progress and EFR 7163 Build
https://r.tapatalk.com/shareLink?sh...om/forum/showthread.php?t=792437&share_type=t
Sent from my iPhone using Tapatalk
- Joined
- Jan 22, 2017
- Messages
- 706
- Reaction score
- 398
- Points
- 63
Fitted my brand spanking new centre armrest cover. The latch was broken when I bought the car and I’ve super glued the hinges more times than I care to remember. 12 quid, smashing.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Joined
- Jan 22, 2017
- Messages
- 706
- Reaction score
- 398
- Points
- 63
On a cold , wet and totally crappy sunday I decided it was a good opportunity to upgraded my knob....gear knob..lol to something a bit non oem, really nice weight and certainly provides a nice smooth gear change feel.
Mine used to be on that low until I cleaned the heated seat switches with some Deoxit F5 and I cleaned out the little fan and temp sender in the heater control box.....now I have it on 19-20 compared to 17.
that's a top tip Carl, I must say my temp adjustments are way out , I normally just turn it up a bit more and a bit more, then its too hot.......
Looks good im in the middle of doing mine heres my progess for you to laugh at
Sent from my SM-A300FU using Tapatalk
Looks good im in the middle of doing mine heres my progess for you to laugh at
Sent from my SM-A300FU using Tapatalk
coming along martin, lookforward to seeing all done and fitted.
Looks great. I’ll be doing mine sometime next month. Looking forward to it.
Sent from my iPhone using Tapatalk
Received my PRV and an upgraded fuel pressure sensor.
I accidentally dropped the PRV when I was trying to thread it in and t went into the deepest, darkest crevice my engine had. I had to take off the whole intake manifold to get to it. What was supposed to be a 30 minute job took me like 4-5 hours!!! 
Also installed a small fire extinguisher on the passengers side. Just in case.
Sent from my iPhone using Tapatalk
I accidentally dropped the PRV when I was trying to thread it in and t went into the deepest, darkest crevice my engine had. I had to take off the whole intake manifold to get to it. What was supposed to be a 30 minute job took me like 4-5 hours!!!
Also installed a small fire extinguisher on the passengers side. Just in case.
Sent from my iPhone using Tapatalk
