They definitely look better black, especially the one on the back. What colour is your audi? Just noticed yours is blue. Black badge on a blue boot will look tidy.
Moro Pearl Blue.
They definitely look better black, especially the one on the back. What colour is your audi? Just noticed yours is blue. Black badge on a blue boot will look tidy.
Bigger brakes finally fitted.
Which carriers u use?
Wish id gone bigger on back rear is silly small
R they the drilled n groved?
Which carriers u use?
Wish id gone bigger on back rear is silly small
R they the drilled n groved?
Removed my rear audi rings as a test, so far I'm still happy lol
Might black them and put them back on
Also prepping my new front GmbH bumper for paint
s4 upright is different and the mounting lugs are spaced differently than on normal a4, carrier and caliper is almost the same, some difference in the cast iron mounting between a4 and a6 but nowt else... The discs are 25mm larger though...
So what is required to fit the S4 caliper carrier to the A4 upright on the front ? Thanks.
Caliper will bolt up fine, however you will have to use the 320mm disc as the 345mm s4 disc would not fit. The mounting lugs are spaced further apart on s4 uprights hence why they accomodate the larger disc. Everything else is almost the same, difference is that some calipers have a flat face and some are more dished... You need to compare them side by side...
How long to get to this stage ! And anything to look out for. I am going to do both wings soon
I just bought mine pre painted. Seemed good enough.Cheers bud, I suppose I should get them painted and then fit them do you think. Just looking did you put the front into service position
I just bought mine pre painted. Seemed good enough.
Nah, not into service position. When you remove the three nuts holding the bumper to the wing and the 6mm allen key bolt in the fog light cover hole. The bumper will just pull forward enough.
Doing this shortly, do you have a link for the wings you used ?
Did the paint match good ?
Carbon wrapped my outside b pillars the other day, looks good. I'm doing the triangle bits on the rear doors today.
Pics later