What Car Care / Detailing Have You Done Today ?
- Thread starter Bristle Hound
- Start date
SWMBO's Captur got the full treatment today 
Not doing any more Detailing this year lol
Not doing any more Detailing this year lol
Neil Woodburn
Registered User
Took the old girl out for a spin through cow muck / soil / salt around the Yorkshire Wolds - 3 hrs to sort it out to back to normal - daily's will have to wait
Took the old girl out for a spin through cow muck / soil / salt around the Yorkshire Wolds - 3 hrs to sort it out to back to normal - daily's will have to wait View attachment 195703 View attachment 195704 View attachment 195705 View attachment 195706 View attachment 195707
Good effort and nice car!
Sent from my iPhone using Tapatalk
SWMBO's Captur got the full treatment today
Not doing any more Detailing this year lol
Nice work as always Col
Was going to change the wheels over today, disaster . Did one and then the locking nut key started doing on all the other wheels. Ended up putting the one wheel back on . Now to source a new nut key.
Gave the A3 a clean though no polish . Used the AG Polar Blast . Very impressed with that. Angel Wax shampoo . MF towel dried and then coated with Cure ..... Like that a lot . Tyres dressed with PERL.
Sorry no photos this time
Gave the A3 a clean though no polish . Used the AG Polar Blast . Very impressed with that. Angel Wax shampoo . MF towel dried and then coated with Cure ..... Like that a lot . Tyres dressed with PERL.
Sorry no photos this time
Far more than I've done mate,wont you need to renew all the locking bolts and a key...Was going to change the wheels over today, disaster . Did one and then the locking nut key started doing on all the other wheels. Ended up putting the one wheel back on . Now to source a new nut key.
Gave the A3 a clean though no polish . Used the AG Polar Blast . Very impressed with that. Angel Wax shampoo . MF towel dried and then coated with Cure ..... Like that a lot . Tyres dressed with PERL.
Sorry no photos this time
Ain't washed my car for 3 weeks mainly due to the time of year and even more so the weather of which has been changing dramatically over night....going spend all day tomorrow on it if the weather is ok
Took the old girl out for a spin through cow muck / soil / salt around the Yorkshire Wolds - 3 hrs to sort it out to back to normal - daily's will have to wait View attachment 195703 View attachment 195704 View attachment 195705 View attachment 195706 View attachment 195707
Stunning! The Stag was one of my favourite cars as a kid and the guy across the road had one in chocolate brown
Took the old girl out for a spin through cow muck / soil / salt around the Yorkshire Wolds - 3 hrs to sort it out to back to normal - daily's will have to wait View attachment 195703 View attachment 195704 View attachment 195705 View attachment 195706 View attachment 195707
@Neil Woodburn What a Superb car!!
Same here loved The Stag.
Wanted it for my first car. But could not afford one at the time, so had to settle for Triumph Dolomite 1500HL instead.
Loved the all the chrome on that.
Decent job mate and decent sub as well.Not car related but did get some DA action this morning . Piano black subwoofer had some nasty scratches to take care of . So I though , why not. Two stage polish ,hex green with Scholl S20 . Then hex white with Menzerna 3800 ........ Bosch !!!!!!!
BTW, then tour apple catchers on the line? Lol
Is the sib for hifi or movies? Interested in what your setup is.
Sent from my SM-G960F using Tapatalk
So you finally got round to it...told ya it would leave a stunning as new finish lolNot car related but did get some DA action this morning . Piano black subwoofer had some nasty scratches to take care of . So I though , why not. Two stage polish ,hex green with Scholl S20 . Then hex white with Menzerna 3800 ........ Bosch !!!!!!!
Got that lx704 just after xmas and hasn't worked at all since l got it,wont pass through a video signal and a audio signal ....been in a right downer lol
Neil Woodburn
Registered User
The Diamond cut alloy wheels take some maintainance - spent today polishing them and coated with Planet Polish so hoping it will last to July
Tomorrow it is the turn of the A6 +A1 for a wash and brush up.
Yeah finally did it mate
your advice was spot on as always Certainly is looking better. Can't believe your having all this hassle with the new AVR. Wish I had some suggestions but I'm totally unfamiliar with the new Pioneer receivers . Take a look on the forums is the best bet ......
https://www.avsforum.com/forum/90-r...er-elite-sc-lx704-sc-lx904-owners-thread.html
Good luck mate and hope you get it sorted soon .
Thanks mate
doesn't look too bad eh . Funnily enough its an in2fetailing wash mitt on the line .... Lol .Sub is for HT and music. 5.1 system , Kef Q900's at the front . Kef Q600c in the centre and Monitor Audio BX2 for surrounds. I am going Atmos though , just ordered a pair of Kef Ci 200qr . So will be 5.1.2. All powered by a Yamaha RX A1070.
Last edited:
I'm hoping to get away with just replacing the key but we'll see mate .
Feel ya pain though . First bit if work I've done to the car since getting it back . Weather has been sh*t down here . Don't envy you up there in Scotland mate . Roll in spring
Tell ye though , that Cure is nice
Don’t forget the before and after pics! Did you get sorted out with new detailing supplies? I recall you saying you needed to get a number of things in the sales
Nice system mate. I've not got into HT however I'm mad on hifi.Thanks matedoesn't look too bad eh . Funnily enough its an in2fetailing wash mitt on the line .... Lol .
Sub is for HT and music. 5.1 system , Kef Q900's at the front . Kef Q600c in the centre and Monitor Audio BX2 for surrounds. I am going Atmos though , just ordered a pair of Kef Ci 200qr . So will be 5.1.2. All powered by a Yamaha RX A1070.
I've got Avondale Audio Grad1 preamp, Avondale M130 mono blocks, Mytek Loberty DAC, bluos streamer for Tidal and Spotify and Audio Physic Classic 30 speakers.
Sent from my SM-G960F using Tapatalk
Good job you didn’t @A4A4, as all you’d have left is a pile of rust lol!!
I bet it is in scrapyard heaven, for sure. Shame.
Neil Woodburn
Registered User
I am surprised, checked years ago and it was the same.
That was the year I sold it, guess it will be a nice 'barn find' for someone to find in Cornwall.
Agree, it's hard work when you leave it to long between washes in winter. If I not got time, then just prewash spray or like the other day I just cleaned the tail pipes, alloys and dressed the tyres. The body work did not look to bad, this was enough for me to think the car looked a little cleaner.
Second that@jassyo06 - S3 looks fab buddy
Via tapatalk
Looking ace mate, I wish I could keep my car in that shape but it is absolutely filthy and has been all winter, I even let VW clean it when it went in for the front end work. Shameful!
Neil Woodburn
Registered User
Found the in2detailing HP Hand Gun a must to clean out the arches of mud and cow muck / straw.
Is the small gun better than the stock lance?
Sent from my SM-G960F using Tapatalk
Sent from my SM-G960F using Tapatalk
Neil Woodburn
Registered User
I would say yes - you can get into the restricted areas in the wheel arches and less effort on your wrists when using it - it has a swivel joint which connects to the HP Hose so reduces tangling of the hose - also the kit comes with various quick connection nozzles and a quick connection to fit in a snow foam gun.
This clip shows the gun in action
So I finally cleaned her yesterday after months of neglect. No polishing, just a routine wash. Some before and after shots. She is in a bit of a state (few dings and scratches, laquer peel on the bonnet) but will get her all fixed up in the summer.
Before:
After:
Before:
After:
Last edited:
Via tapatalk
Some serious beading action there mate
You do tease with your pics, never give too much away, or is that just **** phone?
My pressure washer is very old, it a karcher k2 compact, you reckon that lance would be any better than the stock lance?
Sent from my SM-G960F using Tapatalk
Later not the formerSome serious beading action there mate
Shizer phone mate beading just signifies to me that my car has something protecting the paint as to make it easier to wash the next time around that's all, not a beading fanaticSome serious beading action there mate
My car has done 23700 miles in in 28 months a lot more than l planned at the start but still scrubs up well and it still floats my boat...
Depends what you want, new Lance won't affect pressure or power as that's a system limitation. Although many on here says it's easier to use due to the size of them.
Sent from my HD1913 using Tapatalk
^ This
Similar threads
