virtual cockpit retrofit?

eren

Registered User
is it possible to buy virtual cockpit retrofit parts .

could you advice me part number and if possible price
 
G

Gordo77

Guest
I would guess you are looking at a significant cost... probably thousands. I think you also need to upgrade the steering wheel and MMI to control it.
 

TDI-line

Uber Post Whore
842ee13d7e911b3a837571fde43630a1.jpg
 

Kuku

Registered User
You upgraded a pre MY17 to the CarPlay capable MMI unit?

It can be done - there's a company (wait for it) in Russia that can do this. You need to rip out your MMI unit and send it to them to do some firmware update etc.

Once you've done that you just gotta keep everything crossed that they actually send it back as otherwise you'd be pretty stuffed.
 

DJAlix

VAG Car Coding™ Limited
Site Sponsor
VCDS Map User
Gold Supporter
VAG Can Professional
ODIS (Offboard Diagnostic System)
It can be done - there's a company (wait for it) in Russia that can do this. You need to rip out your MMI unit and send it to them to do some firmware update etc.

Once you've done that you just gotta keep everything crossed that they actually send it back as otherwise you'd be pretty stuffed.
Retrofits can be completed legitimately also :)

Re the VCP, there any many different versions available so in order to find out which one you would need for both your car and market I would speak with your local Audi parts department. Might be an idea to find a VIN or registration number of a local car which you can quote in order to get a list of the parts.
 

RichardT

Registered User
I would guess it'd be a cheaper (and better) bet to just get a new car.
 

RS200Z

Registered User
Can I ask if those who have retrofitted the VC, is your remaining fuel indicator still accurate? Reflecting more or less the same remaining fuel vs mileage travelled compared to the analogue cluster?
 

larbel

Registered User
Can I ask if those who have retrofitted the VC, is your remaining fuel indicator still accurate? Reflecting more or less the same remaining fuel vs mileage travelled compared to the analogue cluster?

Seems like mixed reports so far, some say they have no issue some say it's off... There're actually 2 groups of VC each with 2 part numbers, maybe people reporting fuel reading is off perhaps is using the wrong part??
 

RS200Z

Registered User
Any other owners who has done the retrofit please join in and share your experiences. Hopefully can help in ironing out my remaining issues...

- B&O Sound system (module 47) having error.
- Bluetooth phone calls, other party not able to hear me. (could be related to B&O)
- Remaining fuel tank indicator not accurate
 

Aoon_M

Registered User
Can you put info up of your retrofit @RS200Z I want to retrofit VC into my RS3.

Will buy the facelift S3 dash if needs be
 

RS200Z

Registered User
I didn't change my dash... did like what most has done. Cut and trim the dashboard to fit. Not too difficult a job having seen it done personally.
The part# for the MIB2 and VC unit are as follows:
  • MIB2 - 8V1 035 035
  • VC - 8V0 920 790
i didn't change my MMI control on my centre console yet. But I do have the new TTS steering wheel with comes with the "View" button to toggle between Infotainment view/full screen navi and the dials.
 
Last edited:

Aoon_M

Registered User
@RS200Z how did you overcome the coding and the immobiliser defeat?
 

Aoon_M

Registered User
Also I wonder if coding on the VC exists to enable 'RS' logo/speedo etc. If not guess I may need to wait for RS3 Sedan to launch.
 

mikemod

Registered User
Any other owners who has done the retrofit please join in and share your experiences. Hopefully can help in ironing out my remaining issues...

- B&O Sound system (module 47) having error.
- Bluetooth phone calls, other party not able to hear me. (could be related to B&O)
- Remaining fuel tank indicator not accurate

If it helps any I have VC and B&O factory fitted.

Coding for B&O module 47 is
Coding:0173030000AAAA2AAA0000010000

Coding for VC Module 19 is
Coding:24AD00422B9026000101E8001000000000000000

Tank Calibration in adaptions
IDE02818-IDE02689-Offset for tank calibration values-Complete tank calibration -12.80 l
IDE02818-MAS02376-Offset for tank calibration values-Offset sensor 1 -12.80 l
IDE02818-MAS02377-Offset for tank calibration values-Offset sensor 2 -12.80 l
IDE02818-MAS02378-Offset for tank calibration values-Offset sensor 3 12.70 l
IDE02818-MAS02379-Offset for tank calibration values-Offset sensor 4 12.70 l
 

DJAlix

VAG Car Coding™ Limited
Site Sponsor
VCDS Map User
Gold Supporter
VAG Can Professional
ODIS (Offboard Diagnostic System)
Also I wonder if coding on the VC exists to enable 'RS' logo/speedo etc. If not guess I may need to wait for RS3 Sedan to launch.
:)

FullSizeRender.jpg
 

DJAlix

VAG Car Coding™ Limited
Site Sponsor
VCDS Map User
Gold Supporter
VAG Can Professional
ODIS (Offboard Diagnostic System)
:yum: Is that a firmware upgrade or a coding change ?
Not sure I really want to give up the information for the time being as I would be loosing a professional advantage... if you see what I mean. What I will say is that VCDS cannot perform this change at this moment in time.
 

Aoon_M

Registered User
I'm in!
 

RS200Z

Registered User
If it helps any I have VC and B&O factory fitted.

Coding for B&O module 47 is
Coding:0173030000AAAA2AAA0000010000

Coding for VC Module 19 is
Coding:24AD00422B9026000101E8001000000000000000

Tank Calibration in adaptions
IDE02818-IDE02689-Offset for tank calibration values-Complete tank calibration -12.80 l
IDE02818-MAS02376-Offset for tank calibration values-Offset sensor 1 -12.80 l
IDE02818-MAS02377-Offset for tank calibration values-Offset sensor 2 -12.80 l
IDE02818-MAS02378-Offset for tank calibration values-Offset sensor 3 12.70 l
IDE02818-MAS02379-Offset for tank calibration values-Offset sensor 4 12.70 l

Thanks mate. I noticed my Offset sensor 2 is set to 12.7 instead of -12.8. Will give it a shot and see how it goes.

PS : hmm...I also noticed your gen 2 B&O has more bytes in its coding compared to my pre FL one.
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter

DJAlix

VAG Car Coding™ Limited
Site Sponsor
VCDS Map User
Gold Supporter
VAG Can Professional
ODIS (Offboard Diagnostic System)
Hm, where does the 4000rpm rev limit come in? Is this standard across the board? I wouldn't dare take my car to that rev range cold to find out.
Because the car is in "Park"
 

DJAlix

VAG Car Coding™ Limited
Site Sponsor
VCDS Map User
Gold Supporter
VAG Can Professional
ODIS (Offboard Diagnostic System)
Hi Alex, were you able to get some readings on the Power and Torque dials in Sports Layout? So far, they remains at zero reading for my case.
Never tried / moved as the test car was in bits
 

RS200Z

Registered User
Thanks mate. I noticed my Offset sensor 2 is set to 12.7 instead of -12.8. Will give it a shot and see how it goes.

PS : hmm...I also noticed your gen 2 B&O has more bytes in its coding compared to my pre FL one.

So I attempted to change the adaptation earlier and it needed a security code. The only one I've got is 20103 and it was accepted.
But when I change the value for IDE02818-MAS02377-Offset for tank calibration values-Offset sensor 2, VCDS throw me an Request Out of Range error :disappointed:
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter

Terminator x

Registered User
At Castle Coombe we were asked to rev the car to 5k for the noise test but it wouldn't go past 4k!

TX.

Sent from my STV100-4 using Tapatalk
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
At Castle Coombe we were asked to rev the car to 5k for the noise test but it wouldn't go past 4k!

TX.

Sent from my STV100-4 using Tapatalk

Oh :tearsofjoy: How did you get around that? I'm amazed that the RS3 passes noise tests for the roads, they must be tested in comfort for a start!

Were you on the track session at Combe? With RS3OC? Didn't recognise many cars to be honest, much prefer this forum so I don't know any. I have a video of that full track session.
 

jassyo06

T-Cut King !
There sure is some MAD people on here.....lol
 

Terminator x

Registered User
Oh :tearsofjoy: How did you get around that? I'm amazed that the RS3 passes noise tests for the roads, they must be tested in comfort for a start!

Were you on the track session at Combe? With RS3OC? Didn't recognise many cars to be honest, much prefer this forum so I don't know any. I have a video of that full track session.
They were ok to rev to 4k as realised it wouldn't go any higher :tearsofjoy: yep was out there, one of about 7 nardo ones!

TX.

Sent from my STV100-4 using Tapatalk
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
They were ok to rev to 4k as realised it wouldn't go any higher :tearsofjoy: yep was out there, one of about 7 nardo ones!

TX.

Sent from my STV100-4 using Tapatalk

Lmao, not that they had much choice I suppose I do believe that rev limiter should be removed on the sports series cars, but there we go.

I will have a watch and try to pick you out :D
 

Danys3

Registered User
i have installed on my s3 8v the virtual I have only two problem

I don't see the drive select and pressure for boost!

have a solution??
 
Top