VCDS Help ...Call on the experts !

[steviefleming]

Hi All ,


I’m needing some help with VCDS …….I’m picking up my new S4 Avant on Thursday and would have liked to have swung by the local ‘Audi Specialist’ to have him change a few of the VCDS settings.

Now , he is a good local mechanic , but not a VCDS expert ………so for my previous two cars (S5 and RS4) , I have provided him with the codes.

I need to know from someone if these codes will work on the new B9 S4 so I don’t waste too much time faffing around ….and waste my money with him !! J

Are there any VCDS experts out there who can help me ?


Here’s what I am looking to do ;

Rear LED’s on all the time when DRL’s are on
Removing seat belt chime
Enabling doors locked/alarm armed sound
One Click Remote opening all doors
Adaptive Break Lights
Stop the After-wipe of windscreen wipers when windscreen washer has been used
Auto Release Brake without Seatbelt On



Here are the codes I have used previously ;

REAR LED LIGHTS ON WITH DRL

• ‘Select Control Module’
  
  
• Select ‘09 - Cent. Elect.’
  
  
• Select ‘Coding – 07’
  
  
• Select ‘Long Coding Helper’
  
  
• Select Byte 2
  
  
• Change Bit 7 to 1
  

Removing seat belt chime;

• Instruments 17,
  
  
• Coding,
  
  
• Long coding helper,
  
  
• Seat belt warning active active/inactive
  

Enabling/disabling doors locked/alarm armed sound:


Just make sure you have the latest VCDS/VAG-COM updates installed and check/uncheck the checkbox Anti-Theft-System:

• Horn Confirmation active in 46 Central Conv
  
  
• Long Coding,
  
  
• Byte 01, Bit 2.
  

This may require that factory alarm is installed on the car.


OR

• Module 46
  
  
• central convenience
  
  
• Coding
  
  
• Long coding helper
  
  
• Byte 7
  
  
• Tick bit 3 (locking confirmation (horn) via remote control.
  

One Click Remote opening all doors ;

• Go to the central locking module and select coding.
  
  
• The 'soft. coding' figure in the box needs to be increased by 1024 for beep locks, and another 32 for auto-locks at 15MPH.(i.e. if your figure is 14000, you change it to 15024 for beep, 15056 for beep and auto-lock)
  
  
• Make a note of the 'soft. coding' number when you access the module, so you can go back if it goes wrong
  

Adaptive Break Lights

• Channel 050: Adaptive Brake Light
  
  
• +1 = Emergency Brake Blinking
  

After-wipe of windscreen wipers when windscreen washer has been used

• [09 – Cent. Elect.]

• [Coding - 07] -> [Dropdown] -> "x -- 8K1 955 119 -- WWS xxxx" ->

• [Long Coding Helper] -> Byte 1 Bit 3 - 1= Active 0 = Disabled




Auto Release Brake without Seatbelt On;

• This will allow you to move your car and have the brake release without your seatbelt on.

• [53 - Parking Brake]

• [Security Access - 16] (Enter code presented by program)

• [Adaptation - 10] -> Channel 7 change 1 to 0

 

[DJAlix]

You are gonna need access to Vag Can Professional for the most part as VCDS does not fully support the MLB platform.

Where about a are you based?

 

[firebits]

I think One click remote opening all doors is an MMI option

 

[A4B9]

It is, it was the first thing I did when I got my car

 

[steviefleming]

You are gonna need access to Vag Can Professional for the most part as VCDS does not fully support the MLB platform.

Where about a are you based?

I'm in Perth , Scotland

 

[DJAlix]

I'm in Perth , Scotland

Doh! Am based in London so am of no help

 

[iambu]

One click remote unlock all doors is definitely a standard option within the MMI on the B9. I'm also sure the emergency brake flash is standard according to the manual.

 

[cuke2u]

That is the default setting, you can change it to only unlock the drivers door with one click, or all doors with two...