VCDS Fault codes . . .

Olly_K

Registered User

DOLPHIN DIESEL

Registered User
Hi,

I have some fault codes on my 2010 Q5 and the airbag light is on, can anyone help with these?

5 Faults Found:
9438747 - Igniter for Seat Belt Tensioner; Driver's Side
B1006 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 163618 km
Date: 2009.06.27
Time: 17:57:32

9439003 - Igniter for Seat Belt Tensioner; Passenger's Side
B1007 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 163618 km
Date: 2009.06.27
Time: 17:57:32

9442075 - Driver's Belt Force Limiter Igniter
B1013 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 163618 km
Date: 2009.06.27
Time: 17:57:32

9442331 - Passenger's Belt Force Limiter Igniter
B1014 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 163618 km
Date: 2009.06.27
Time: 17:57:32

9444137 - Front Passenger's Front Airbag Crash Sensor
B101B 29 [137] - Signal Implausible
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 163618 km
Date: 2009.06.27
Time: 17:57:30

Thanks
 

Boj27

Active Member
Hi guys,

wondering of any of your VCDS gurus can help me out.....

Ignoring the 2 component protection errors below (this is a retrofit hacked mib2 unit). I cannot seem to get rid of the error regarding lane assist. I have disabled every adaption channel with regards to lane assist and departure warning, but it still will not clear. I will post a picture below of the channels that are all set to disabled....




Address 5F: Information Electr. Labels: None
Control Module Part Number: 8V1 035 035 D HW: 8V1 035 035
Component and/or Version: MU-P-LND-EU 042 1168
Software Coding: 017303010000000011111102000A00002F0028E701000100DE
Work Shop Code: WSC 12345 123 61029
ASAM Dataset: EV_MUHig6C3Gen2HBAS 001115 (AU37)
ROD: EV_MUHig6C3Gen2HBAS_AU37.rod
VCID: 3333E3097BBC9D8F07B-8066
4 Faults Found:
13697024 - Component Protection
U1100 00 [009] - No Basic Setting
[Anti-theft protection - component protection: no basic setting or basic setting incorrect]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 239
Mileage: 43913 km
Date: 2019.09.14
Time: 23:11:36
Voltage terminal 30: 11.9 V
15361024 - Component Protection
U1101 00 [009] - Active
[Anti-theft protection - component protection active (0xEA6400)]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 239
Mileage: 43913 km
Date: 2019.09.14
Time: 23:11:36
Voltage terminal 30: 11.9 V

7193 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[Lane departure warning: heading control (0x19) - function restriction due to communication error - BapErr_retry not successful]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 239
Mileage: 43913 km
Date: 2019.09.14
Time: 23:11:38
Voltage terminal 30: 11.9 V
BAP-BAP_Function_ID: 02
 

Attachments

  • error codes.PNG
    error codes.PNG
    180.6 KB · Views: 951
Top