Tyre pressures after new alloys

[Daniela3]

Hi all I have brought a set of 19 inch wing arm alloys for my Audi A3 saloon 2.0 40tfsi s-tronic my card for tyre pressure only states 18inch wheels that are the original does any one know what pressures I should be running as this model is not as popular as most
Thank you

 

[mike170]

Should tell you on label on drivers door sill!


Sent from my iPhone using Tapatalk

 

[The_Ironist]

I run 39 front 36 rear which is the firmer of the door sill recommendations on S3 Saloon for all 235/35/R19

 

[Daniela3]

Should tell you on label on drivers door sill!


Sent from my iPhone using Tapatalk

Factory wheels were 18” I have put 19” on the door card only shows pressures for up to 18”

 

[Harvey]

This should help. So basically whatever pressure you were running in the 18s use the same in the 19s

 

[Daniela3]

This should help. So basically whatever pressure you were running in the 18s use the same in the 19s

thank you I will put the pressure in on my door

 

[The_Ironist]

This should help. So basically whatever pressure you were running in the 18s use the same in the 19s

What car is this from? Got me second guessing myself now but my car is around the corner

 

[winrya]

What car is this from? Got me second guessing myself now but my car is around the corner

My 2018 S3 has the same label

 

[The_Ironist]

Strange, from my 2017 FL S3 Saloon:

I guess 1 psi difference isn’t much but with the full load it’s a bit more of a difference.