There is a post on here by @glasgow1 I think- he bought one a while ago and it didn't work for the C8. May be best checking with Kufatec to make sure they have changed it for the new MMI system.Just to give you an idea, Hazzy Dayz in Herts charge £225+vat for this. Like I said, probably cheaper to just buy the Kufatec dongle
https://www.hazzydayz.com/traffic-s...---supply--fit---a6-4g-a7-4g-a8-4h-7384-p.asp
(its shown for the A6 C7 but i believe the price is the same for the C8)
Thanks for the headup. I bought mine a few weeks ago from Kufatec Germany and plan to use it next month when my MY20 A6 is delivered. According to the dongle instructions, for cars >2019 you need to open the bonnet for the dongle to work. But I will check with Kufatec just to be sure the dongle is compatible.There is a post on here by @glasgow1 I think- he bought one a while ago and it didn't work for the C8. May be best checking with Kufatec to make sure they have changed it for the new MMI system.
Nice one, hope it all goes well when you install it. Dont forget, once you pick up the car, it's mandatory to put up someThanks for the headup. I bought mine a few weeks ago from Kufatec Germany and plan to use it next month when my MY20 A6 is delivered. According to the dongle instructions, for cars >2019 you need to open the bonnet for the dongle to work. But I will check with Kufatec just to be sure the dongle is compatible.
No worries, will doI'm very interested in this as well, it's something I miss as my last car had it. Please let us know how it goes.
From the prices on their website, they are not much different from Audi dealer quotes. Only difference is that some of the options may not be available from Audi themselves.Just to give you an idea, Hazzy Dayz in Herts charge £225+vat for this. Like I said, probably cheaper to just buy the Kufatec dongle
https://www.hazzydayz.com/traffic-s...---supply--fit---a6-4g-a7-4g-a8-4h-7384-p.asp
(its shown for the A6 C7 but i believe the price is the same for the C8)
Hi,I'm very interested in this as well, it's something I miss as my last car had it. Please let us know how it goes.
Hi,
Just to let you know the Kufatec dongle works 100% on the C8 A6 - I enabled Traffic Speed Sign recognition on my 2020 A6 this morning. Its an absolute MUST you leave open the bonnet during coding otherwise it won't work. It works on both Virtual Cockpit & standard dashboards.
This is how I did it:
1) Open bonnet
2) Switch on ignition (not engine) & wait for 30 sec.
3) Plug dongle into OBD port
4) Leave dongle plugged in until red LED on dongle stops flashing - takes about 1 minute.
(NOTE: during coding the dashboard will display all sorts of warnings/error messages/gobbledy gook, DO NOT PANIC as its normal)
5) Remove dongle, switch off ignition and close bonnet
6) Lock car and wait at least 10 mins before starting car.
7) Once you start driving, the car will permanently display a speed limit sign as soon as it picks up the first one.
Btw Audi dealerships usually charge you around £250-£300 to do same dongle coding, so ~ £150 for the same is far cheaper
I'll try to do a full scan using Carista OBD and pm you the results.Don’t suppose you have a full scan
Sent from my iPhone using Tapatalk Pro
I'll try to do a full scan using Carista OBD and pm you the results.
Cheers
Nope, not sent you any message yet I'll pm you after I've done the full scan using Carista in the next day or two.Hi I think I had a message from you but for some reason I cannot find it after the notification if you have message me can you please resend if not Sorry for the bump
Sent from my iPhone using Tapatalk Pro
HiI am going to try them next as service is due
Sent from my iPhone using Tapatalk Pro
Glad to hear it worked . Out of interest does your car have the standard cockpit or virtual cockpit?I did mine yesterday following psychopomp1 instructions and it worked perfectly. Thanks!
The one I used is below.
View attachment 198323
Glad to hear it worked . Out of interest does your car have the standard cockpit or virtual cockpit?
View attachment 198356 Standard cockpit,
I’ve got the standard cockpit so it now looks like the below picture when using the satnav.