Dibdub1
Suck.Squeeze.Bang.Blow
.
Ahhhh haaaa, thanks for clearing that up! So in theory I could put axle stands under the jacking points then use my trolley jack to do the process you describe above??? I'm going to have to get spring clamps now. I got mine from tps hope they last longer than 6 months!! If they don't tps shall be having them back, receiving them by baseball throw across the trade counter!
Cheers, Sean
Yeah so basically loosen off strut top bolt/nut, jack the car up (wheel off etc obv) put axle stand in place at jacking point, put trolley jack under wishbone/bottom of strut and hub, undo strut completely at the top, slowly let the jack down so you've got enough room to get the old top mount out and bearing off the strut, then replace and jack the wishbone etc up until it's all in place and bolt the strut back up into the strut turret, let jack down and remove it, wheel back on etc and you're done!
Isn't too hard at all really fella!
Peace!
Dibdub1