I went to the AMD RR day today,and met up with a load of guys from here,and want to thank Alex again for arranging it,and Ben,Shaun and everyone at AMD for running it.
Once again,my car and the dyno didn't see eye to eye.
It starts to pull load out from 5500 rpm,and although power rises smoothly to 6500rpm,there's a good bit more to come,which we can't measure on the dyno.
The dyno doesn't load the engine properly,and the result is that boost isn't held,and power is also lost.
On the road,the car will pull 2.2bar at 7000rpm cleanly,whereas on the dyno it won't get beyond 2bar at ANY point.
I've already done the ifs and buts on the AMD rolling road thread,but if it loaded up proprely,and pulled 2.2bar,with torque maintained,it would easily hit 530bhp,which is what it will do on the real road.
Anyhow,excuses and calculations aside,it was a good morning.