Does anyone have a picture of a 8P with:
- 8x18 ET42 rim or...
- 8x18 ET50 rim with 8 mm spacer?
I have genuine RS3 8x18 ET50 rotors with 225/40-18 tyres on my car. I used 5 mm unbranded (but looking pretty good quality ones) spacers all round for flusher look, but they caused slight vibration on a speed of around 70 km/t because there wasn't a hub centric lip on the spacer. I'm considering to purchase the H&R DR spacers, but the narrowest ones with the hub centric lip are 8 mm. If I installed them, the effective ET would be 42. I want the flush look but I also want to avoid the wheels poking out of the fenders. I'd appreciate if anyone could share a picture of a front fender with the wheel setup in question.
P.S. My car is lowered by approx. 30 mm. The pictures with the wheels I use and 5 mm spacers were posted previously, but here's one more
8x18 ET50 rotors with 5 mm spacers. Do you thing extra 3 mm of track width wouldn't ruin the look?
View attachment 148245