The Black Edition

J10NMM

Registered User
Joined
Aug 23, 2019
Messages
409
Reaction score
155
Points
43
Location
Stoke
Spent the day in the sun and opted for something to brighten up the wheels

11143-1587072506-3e7ba4bf82970bf2486affd18ab3fc9b.png


11142-1587072489-491eccb2dc86128509f9781d5ac71472.png


11144-1587072529-3d303fde6336b38ec30fd6ae16d95aa0.png


11145-1587072543-8ceb454030f3418130b465cdc78c366f.png
 
  • Like
Reactions: Radford212
Fitted the RS grill the other day as well

11134-1586696742-4882aadf63cf1caf35b18cd015e73e4f.png
 
  • Like
Reactions: Bulldog and Rhyso
You should of painted the hub of the discs too makes such a difference when the cars clean.

C7C8A981 5617 41E2 932D D48D5C36581F


A5E17639 2ED7 427A B9AF 7028C53C46D2
 
Used a rust-oleum as an undercoat before the Zinc top coat

11147-1587122830-e1ee88c940c52189842f2bc6990184db.png
 
11148-1587123802-3723955232aa1d812b603c1ba94afda9.png
 
  • Like
Reactions: BoringDamo, Matt Adamson, DickoB8 and 4 others
I used these as it cut out the primer process

B91F7E88 BF69 4675 9DD6 9020093DC1B3


0E66505B 3346 4512 BCF2 A491F8EC6719
 
  • Like
Reactions: J10NMM
just picked it up after it's service and I'm £625 lighter

2 new tyres
Gearbox oil service
Air con service

luckily the main oil service & inspection was free
 
  • Like
Reactions: DickoB8
just picked it up after it's service and I'm £625 lighter

2 new tyres
Gearbox oil service
Air con service

luckily the main oil service & inspection was free
Ouch. The car looks good though. :)
 
Did you have to take your bumper off to get the grille installed? Tried myself and I looks like there are screws behind the crash bar?
 
Yes you have to remove the bumper to access the grille.

The grille is held in place by approx 20 clips; you’ll need a couple of pairs of hands and several flat edge screwdrivers!!
 
Yes, quite painful to change the grill. Don't forget to get the crash bar painted ( in black ) as they're normally silver and it will stick out.
 
You had to take the front end off to get to the screws behind th crash bar?

was able to do it without completely removing the whole front end, ones side was still attached

[photo=medium]10661[/photo]

then just loosened a few bolts on the other side