Sportback Thanks to Alex @ Vagcarcoding

NevMan

Well known member
Big shout out to Alex at vag car coding.
He fitted hill hold assist, a reversing camera and front and rear thinkview camera.

He did this at my residence and I can’t praise his service enough.

Recommended.

R

+1 - he did coding, and fitted reversing camera and front/rear thinkviews too
 

V6_Man

Moderator
Staff member
Moderator
VCDS Map User
How much was the reverse camera retrofit ?

I'd suggest you drop @DJAlix a line. Imo, price varies depending on the camera including if it is front only or dual channel and options such as cloud storage etc you are looking at.
 

NevMan

Well known member
Agree, but he is asking about reversing camera. Alex sources the camera for me, and I then paid for camera and fitting.
 

V6_Man

Moderator
Staff member
Moderator
VCDS Map User
Agree, but he is asking about reversing camera. Alex sources the camera for me, and I then paid for camera and fitting.

I just read camera and missed the 'reverse' bit . Cheers @q5mam
 

neg

Registered User
Sorted me out too.

I've had reverse camera on the Q7, TPMS on the RS3 and also did some coding including Mag ride setup.

Oh and he rewired my dash cam too and fitted my rear camera.

Top man and highly recommended.


Sent from my iPhone using Tapatalk
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
+1, great guy.. best knowledge in the business with all the tools. I think you’d struggle to find a main dealer that knows how to use their own tools as well as Alex does and what’s best, it’s all approved and warranty friendly with him being authorised.

One complaint, he’s in London... grrrr! Wrong side of the bridge ;)
 

D0C

Registered User
+1, great guy.. best knowledge in the business with all the tools. I think you’d struggle to find a main dealer that knows how to use their own tools as well as Alex does and what’s best, it’s all approved and warranty friendly with him being authorised.

One complaint, he’s in London... grrrr! Wrong side of the bridge ;)
You on holiday again, @AudiNutta ?

Proper keyboard warrior this last week! ;)
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
You on holiday again, @AudiNutta ?

Proper keyboard warrior this last week! ;)

You know it :lmfao:

Been in Lanzarote for a week, got back early hours of the morning.. back to the grind tomorrow :(
 

DW81

Registered User
+1, great guy.. best knowledge in the business with all the tools. I think you’d struggle to find a main dealer that knows how to use their own tools as well as Alex does and what’s best, it’s all approved and warranty friendly with him being authorised.

One complaint, he’s in London... grrrr! Wrong side of the bridge ;)

This is why we need to use independent specialist in there fields, I couldn’t agree more.
 

Slowracer

Registered User
+1, great guy.. best knowledge in the business with all the tools. I think you’d struggle to find a main dealer that knows how to use their own tools as well as Alex does and what’s best, it’s all approved and warranty friendly with him being authorised.

One complaint, he’s in London... grrrr! Wrong side of the bridge ;)

My complaint, he’s on the wrong side of the world. No independents in Australia that can do a mag ride calibration. :(
 

Sandra

Administrator
Staff member
Administrator
Audi Main Dealer
Platinum Supporter
Big shout out to Alex at vag car coding.
He fitted hill hold assist, a reversing camera and front and rear thinkview camera.

He did this at my residence and I can’t praise his service enough.

Recommended.

R

+1 - he did coding, and fitted reversing camera and front/rear thinkviews too

Sorted me out too.

I've had reverse camera on the Q7, TPMS on the RS3 and also did some coding including Mag ride setup.

Oh and he rewired my dash cam too and fitted my rear camera.

Top man and highly recommended.


Sent from my iPhone using Tapatalk

Guys if you want to leave a review for @DJAlix Alex he would really appreciate it. Link below.

https://www.audi-sport.net/xf/showcase/vag-car-coding.171/
 

NevMan

Well known member
My complaint, he’s on the wrong side of the world. No independents in Australia that can do a mag ride calibration. :(

He has definitely done remote work, a few examples being some in the states. He would need to send you a dongle, worth PM’ing him, as may still not be possible for mag ride
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
He has definitely done remote work, a few examples being some in the states. He would need to send you a dongle, worth PM’ing him, as may still not be possible for mag ride

Oh yeah good idea, I don’t see it being an issue but the owner would have to take the measurements from the wheel centre to the arch which isn’t difficult.
 
Top