Steel rods, Are these ok for a APY engine?

[Andrew@A.L.D]

http://www.intengineering.com/VW/Rods/Integrated-Engineering-p3333559.html

 

[sos3]

i think i remember seeing somewhere the apy has 20mm pins the other later two engine codes are 19mm

 

[Andrew@A.L.D]

If thats the case then it will have to be these

http://www.ctsturbo.com/products/Scat_144_x_20mm_Forged_Rods_for_1_8t_VW_16v_Early_8v-148-8.html

or these

http://www.intengineering.com/VW/Rods/Integrated-Engineering-p4664095.html

 

[badger5]

20mm pins for you

IE rods are fine to use.. good gear
regards
bill