- Joined
- Jul 20, 2016
- Messages
- 145
- Reaction score
- 63
- Points
- 28
I have the 6XE folding mirrors which includes a kerb view function in reverse. Sometimes (in fact only a few times) it has appeared to work, but most of the time if I set it to suit the view reversing, it fails to go back to the normal position. The instructions in the manual are not very good.
"Tilt function* for front passenger s exterior mirror.
The mirror is tilted slightly to provide a better view of the kerb when parking backwards. This feature only works when the knob is in the position for adjusting the front passenger s mirror.
You can adjust the tilted mirror surface by moving the knob in the desired direction. This new position is automatically stored and assigned to the remote control key when you take the car out of reverse.
The mirror returns to its original position as soon as you drive forwards at over 15 km/h or switch off the ignition."
If anyone has got this working, could they please share a step by step set-up guide? I know that the function only works when the mirrors controller is pointing towards the passenger mirror. What I don't know (and can't figure out - despite numerous attempts) is whether the car has to be in reverse when you set the tilting angle, whether you then have to go back to the centre position to save the function, or whether you need to get out of reverse to store it, or what you have to do. In short, how do you set it up?
"Tilt function* for front passenger s exterior mirror.
The mirror is tilted slightly to provide a better view of the kerb when parking backwards. This feature only works when the knob is in the position for adjusting the front passenger s mirror.
You can adjust the tilted mirror surface by moving the knob in the desired direction. This new position is automatically stored and assigned to the remote control key when you take the car out of reverse.
The mirror returns to its original position as soon as you drive forwards at over 15 km/h or switch off the ignition."
If anyone has got this working, could they please share a step by step set-up guide? I know that the function only works when the mirrors controller is pointing towards the passenger mirror. What I don't know (and can't figure out - despite numerous attempts) is whether the car has to be in reverse when you set the tilting angle, whether you then have to go back to the centre position to save the function, or whether you need to get out of reverse to store it, or what you have to do. In short, how do you set it up?