S3RYE's Build Thread

Farhan

Registered User
big brakes ftw :hubbahubba:
 

S3RYE

Interior Next!!
looking quality mate!
need some CH-R in 19s on there should give you enough gap to show the stoppers off ;)

Yeh ive got many different sets on my mind, as always though ive also got other things on the mind. KW's :wub:

Absolutely love it geez! :wub: chamon you Essex pimp!!

you KNOW Chris :drag:

like i said on facebook mate very nice they are :wub:

Cheers Fran :friends:

Ry they are just sexual :wub: Your sexual as well :wub:

:wub::kiss::ninja: Nuff Said!!!

big brakes ftw :hubbahubba:

Yeh i think you got that one right brother, Will never be able to own a car without a BBK now.... They are Epic!

there is some lovin going on right there haha

you could say that :lmfao:
 

quattro81

All the gear.. No idea
How can there not be loving for a man who is headed 100% in the right direction!?:applaus:
 

Ash B

Registered User
They look lovely Ry :wub: Got yourself a good deal as well!
Cant wait for the cheeky test drive when im down:p
Good luck fella keep it up :thumbsup:
 

S3RYE

Interior Next!!

S3RYE

Interior Next!!
Few new Pics... Nothing special but she got 2 hours of my time friday evening so was gleaming for 5 minutes then it rained :banghead::banghead:

IMG_2542.jpg


IMG_2543.jpg


IMG_2544.jpg
 

S3RYE

Interior Next!!
No updates just yet, But i can assure you there will be very soon.... :ninja::ninja::ninja:

My friend and i spent a good few hours on the cars sunday and thought it weas rude not to get a few pics of the beasts! all 715 HP of them :rock: His car wont be to all's fancy so ill try and incorporate Audi into all pics, otherwise you'll all moan at me. :haudrauf:

Clean Millteks...

IMG_3351.jpg


IMG_3353.jpg


IMG_3354-1.jpg


IMG_3355.jpg


IMG_3360.jpg


IMG_3362.jpg


IMG_3363.jpg


That is all....

And before you say anything, both cars will be on KWV2's very shortly. :p
 

warren_S5

Moderator
Moderator
VCDS Map User
Quality mate, both looking lovely!

God I love the M3's rims, probably one of my favourite of all time (a mate has them on his CSL E46).

Your car is best obviously!
 

S3RYE

Interior Next!!
Quality mate, both looking lovely!

God I love the M3's rims, probably one of my favourite of all time (a mate has them on his CSL E46).

Your car is best obviously!

Thanks War!! Its a lovely M3, CSL wheels, CSL boot, AP brakes all round! Full milltek and mapped. Just needs Coils!

and my car well, as you say is best :thumbsup:
 

S3RYE

Interior Next!!
Looking good mate!

Whose is fastest?? :eyebrows:

we havent actually had them side by side yet! + now the weathers gone poop! which is a problem for him unlike myself with 4wd. So basically ME. :laugh:
 

Paullie

Banana Menace!
VCDS Map User
Beautifuuuuuul Rye!!!! Gotta love the M3's, ..but as the guys have said yours is obviously way better! Can't wait to see the KW quality on there soon, lol! Love your car!! :wub: xx
 

Phil_T

Revo Stage 2+ Audi S3
Brakes look good, looking at some for mine at the moment but 8 pots
 

S3RYE

Interior Next!!
Brakes look good, looking at some for mine at the moment but 8 pots

thanks Phil, they are seriously strong! probably not far off the 8 pot power tbh! What BT you going with? if all goes to plan fixing my car i think i'm gonna head that way this year...
 

Phil_T

Revo Stage 2+ Audi S3
thanks Phil, they are seriously strong! probably not far off the 8 pot power tbh! What BT you going with? if all goes to plan fixing my car i think i'm gonna head that way this year...

They are nice & I do like them but for the price AP sell them for I can get 8 pots, Will be going GTX3071 as dont want more lag on the 3076 even though it would be more power ill be happy with my setup at 520- 560bhp on my built engine when its finished. But this year I have a list long of things to do first before the turbo eg bigger brakes for start
 

Rob_

White Audi A3 S-Line 09
Must admit, you have done a good job with this buddy! Little bit jealous if I am completely honest ;)

Interested in an induction kit for mine though, how much did yours set you back? Any recommendations for makes? Don't want to spend a fortune but equally don't want any cheap cr*p putting in...

Oh and I highly recommend a short shifter by forge... will massively improve the feel of driving the beast! Its next on my list after driving a friends with it fitted.
 

S3RYE

Interior Next!!
They are nice & I do like them but for the price AP sell them for I can get 8 pots, Will be going GTX3071 as dont want more lag on the 3076 even though it would be more power ill be happy with my setup at 520- 560bhp on my built engine when its finished. But this year I have a list long of things to do first before the turbo eg bigger brakes for start

Yeh thats true! i don't even know exactly how much the AP's are new? i got them next to new for a great price so i cant complain! I also need to sort a few things with the car i'm going to BT it, Coilovers etc. Can i ask Phil what's the BSH PCV mod and how much?

Must admit, you have done a good job with this buddy! Little bit jealous if I am completely honest ;)

Interested in an induction kit for mine though, how much did yours set you back? Any recommendations for makes? Don't want to spend a fortune but equally don't want any cheap cr*p putting in...

Oh and I highly recommend a short shifter by forge... will massively improve the feel of driving the beast! Its next on my list after driving a friends with it fitted.

Thanks Mate!! :)

I'm not sure what engine you have but i have an evoms intake. Sounds great! i'm not sure what will fit yours but look at Forge, ITG or Evoms. They tend to be the preferred! I've kind of considered a shortshift for ages. i think its one of those small things you always think about but never get round to doing!
 

Phil_T

Revo Stage 2+ Audi S3
Check my thread mate should be a write up in there, was about £60
 

poli84

Registered User
Car is amazing mate.
Hopefully your problems get sorted and you go down the BT path!
 

S3RYE

Interior Next!!
Check my thread mate should be a write up in there, was about £60

Cheers Phil will check it out!

Car is amazing mate.
Hopefully your problems get sorted and you go down the BT path!

Thanks brother. BT could well be in the pipeline! :cool:
 

S3RYE

Interior Next!!
Update;

Car has been at AMD to finally sort this misfire issue once and for all (Given up on Audi they basically told me to get lost the minute the warranty run out)

Turns out it was the valve springs. They pulled them out the car and according to the TSB released by Audi they were wrong. New revised springs are in the car and its pulling like never before. Absolutely no hesitation all the way through to 7250RPM, No blips in power literally all symptoms gone. Happy is not the word. :rock::rock:

So anyone who suffers from the same symptoms i had for nearly two years, go to Audi and tell them to ****** sort it out. Or do what i did. (which i wish i did a long time ago) pay an independent and send audi the bill. Im talking to a solicitor i know today to see where i can get with it.


Cars going to Brands Hatch next week for a trackday so will have loads of pics!

In terms of updates (mods) i'm ordering some carbon mirrors tomorrow and the car is finally getting retrimmed next month! should be a good month!!
 

Farhan

Registered User
good stuff ryan! 2 shows next month inters and dc12! let me know if your on going.
 

S3RYE

Interior Next!!
going for this which is nothing like Nath or Luke (ain't got big enough balls) i just don't know what to do with the contrast stitch.



S3ALCANTARA.png
 

S.

Save the manuals
glad you've sorted missfire issues. how much did it cost?
seats will look great.
great plans. and have fun on the track :D
 

S3RYE

Interior Next!!
glad you've sorted missfire issues. how much did it cost?
seats will look great.
great plans. and have fun on the track :D

wasnt cheap! 8 hours labour. £750 inc labour and parts. :faint:
 

quattro81

All the gear.. No idea
That is exactly what i was getting quotes for, mate! Half alcantara is the one... Although I found a different configuration on the panels
I like 'em in this colour.. same as you posted dude :wub:
ScreenShot2012-05-24at175826.png


But i like the extra bit on the "shoulders" trimmed as well - leaving only the headrest bit in leather? (ignore the colour!)
b26b3ee3.jpg


Also I like the stitching in silver.... but I have gone for the red dutch quilted smoking jacket look on the rs3 lol
 

S3RYE

Interior Next!!
Great minds think alike. I'll be doing the shoulder parts too! Seen a RS6 like that looks much better! Silver stitch is where I'm leaning too. Purely to match the s/wheel, gaiter and handbrake!
 

quattro81

All the gear.. No idea
can't wait to see it mate:yum: I feel a little meet up coming on at some point.......
 

S3RYE

Interior Next!!
can't wait to see it mate:yum: I feel a little meet up coming on at some point.......

Well your guaranteed a visit from me when you get the RS3 anyway haha! But defo. I reckon the trim will be done by mid June 100%
 

jungleman

Registered User
glad AMD sorted the misfire mate!
will have to go for a drive with you now and see how it pulls, and need to go for a cruse in mine... its taking some getting used to haha!
 

quattro81

All the gear.. No idea
If only they would've let me have alcantara on my RS3 bucket seats...:( Tis not fair, the germans are allowed to spec it over there, just not for us.... We're only allowed it from new on s-line seats.
I think you're going for alcantara on the right parts of the seat too - you definitely want it anywhere the seat grips you as it creates much more friction than the leather and really stops you sliding around on your seat under MASSIVE G-force:) I like the fact on your pic that the inside side panels are alcantara:drool: too - It's all gettin too much for me :faint:
 

poli84

Registered User
Well done on getting the issue fixed. Nothing worse than a niggling thing like that to ruin the love for your car.

Those seats you proposed for the re-trim look unreal!
 

S3RYE

Interior Next!!
N8 big balls :laugh:

cray.jpg


glad AMD sorted the misfire mate!
will have to go for a drive with you now and see how it pulls, and need to go for a cruse in mine... its taking some getting used to haha!

yeh defo! we got some nice weather for it too! which im sure will change next week! whens the next Ace??

If only they would've let me have alcantara on my RS3 bucket seats...:( Tis not fair, the germans are allowed to spec it over there, just not for us.... We're only allowed it from new on s-line seats.
I think you're going for alcantara on the right parts of the seat too - you definitely want it anywhere the seat grips you as it creates much more friction than the leather and really stops you sliding around on your seat under MASSIVE G-force:) I like the fact on your pic that the inside side panels are alcantara:drool: too - It's all gettin too much for me :faint:

LOL! yeh im also doing the door cards in alcantara!

Well done on getting the issue fixed. Nothing worse than a niggling thing like that to ruin the love for your car.

Those seats you proposed for the re-trim look unreal!

tell me about it. i literally have had no love for the car for ages! its all back now though! hence wanting to spend money and time on it again!
 
Top