S3/TT arm in A3 - What bush to use?

[VAG-Slag]

I've got a set of TT arms (and hubs) I'm swapping out into the A3. Previously I had additional caster bushes on the A3 but by the looks of things they're too small for the TT arms. I've had a look and additional caster bushes don't seem to be readily available for the TT/S3 on their own.

Basically, what's the general consensus on the best bush to use? Are additional caster bushes even worth it?

For what it's worth the car is a weekend car, and I'll be using an insert and a normal powerflex 30mm bush up front.

Thanks

 

[Prawn]

absolutely worth it mate.

Pressed arm bushes are poly only and push in.

Cast arm bushes have a metal ring around the poly, SPF3397K is what you need

http://www.superpro.com.au/find/superpro-bushing-kit/orphan-SPF3397K?cid=&vid=

 

[VAG-Slag]

absolutely worth it mate.

Pressed arm bushes are poly only and push in.

Cast arm bushes have a metal ring around the poly, SPF3397K is what you need

http://www.superpro.com.au/find/superpro-bushing-kit/orphan-SPF3397K?cid=&vid=

Nice one prawnster, couldn't see them anywhere!...

100 squid a pair though!? . . Ouch, right in my leathery sack! (my wallet of course)