S-line bumper trim

[CK87]

I was looking for an used s-line bumper and found out that some/most of them are missing the side air intake trim in the bumper.l (see attachment). It is some kind of long rectangular shaped trim.
I can’t find the part number of these parts to buy it from the official dealer so I was wondering if anyone could help out on this.

 

[Herc88]

Here are the part numbers i did that retrofit from sa to sline bumper
8V38076849B9
8V38076839B9

Sent from my VOG-L29 using Tapatalk

 

[CK87]

Here are the part numbers i did that retrofit from sa to sline bumper
8V38076849B9
8V38076839B9

Sent from my VOG-L29 using Tapatalk

Thank you so much!

the bumper is installed!
Then you (or somebody else) might know the answer to this:
I didn’t remember how it was before because somebody else removed the headlight washer covers from the old bumper for me. After i installed the covers on the new s line bumper, it seems that the covers itself is like “loose” or like, it’s able to move somewhat vertically. Is this as it should be? I orginally thought the caps are like fixed in place so you can’t move it even an inch but it seems like it can.

 

[JohnM100]

Should be rigid with no play in the washer covers.

 

[CK87]

Should be rigid with no play in the washer covers.

thanks for replying.
but I actually think it's originally a little bit ''moveable''. See this clip.
you can see some movement just after opening en right before totally closed.