1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RRNS-E Problem- No satellites signal and it's not the antennae?

g60leigh Nov 24, 2015

  1. g60leigh

    g60leigh Well-Known Member

    1,675
    207
    63
    Desperate for some help. PLEASE.
    I have a mk1 RNS-E that is working fine except for the GPS signal.
    It won't detect any satellites at all.
    I have tried 3 different antenna and tried the antenna on a different unit so I know that the antenna works.

    Can anyone help please
     
  2. Avatar

    Google AdSense Advertisement


  3. s8craig

    s8craig Well-Known Member VCDS Map User

    1,854
    67
    48
    Have you tried just removing the power from the RNS-E
     
  4. g60leigh

    g60leigh Well-Known Member

    1,675
    207
    63
    Yeah tried it on bench and in car etc
     
  5. s8craig

    s8craig Well-Known Member VCDS Map User

    1,854
    67
    48
    Have you took the lid off and checked the run of the GPS cable from the back panel to the board.
     
  6. g60leigh

    g60leigh Well-Known Member

    1,675
    207
    63
    Yeah looks ok until the point it goes into top of pcb
     
  7. g60leigh

    g60leigh Well-Known Member

    1,675
    207
    63
    Can't see further than that
     
  8. vidacalavera

    vidacalavera Member

    54
    25
    18
    Did you fix this at all? I'm having the same issue.
     
  9. g60leigh

    g60leigh Well-Known Member

    1,675
    207
    63
    Yeah I sent it off and they fixed it. Was a place in Manchester. Advertises on eBay
     
  10. vidacalavera

    vidacalavera Member

    54
    25
    18
    N
    Nice one. Thanks for that.
     

Share This Page