Retro Fit Aluminium Styling Pack

Behind The Bins

Registered User
As the title how easy is it to retro fit the matt aluminium styling pack to a FL RS3

Has anyone got exploded bumper layouts for the FL showing the part numbers or can anyone let me have the Matt aluminium insert part numbers

I can find the part numbers for a PFL but not FL

Would the bumpers have to be removed to swap the inserts?

Costs involved?
 
T

T-800

Guest
As the title how easy is it to retro fit the matt aluminium styling pack to a FL RS3

Has anyone got exploded bumper layouts for the FL showing the part numbers or can anyone let me have the Matt aluminium insert part numbers

I can find the part numbers for a PFL but not FL

Would the bumpers have to be removed to swap the inserts?

Costs involved?


I can get you exploded views tomorrow morning.......and part numbers

The front bumper has to come off to swap the grill over, the bottom 'blade' is in 3 parts (middle piece, L/H & R/H outer Blade pieces) the bottom piece of the bumper is screwed/clipped and needs to be separated to access/swap over parts.

The Rear exhaust surrounds are clipped into the diffuser.

Cost wise from memory the 2 blades are £120 each the straight piece that runs across under the grill is £100

The Grill is £900 +

Rear exhaust trims are around £130 each
 

Behind The Bins

Registered User
Sorry just to clarify then if I swap the blades and rear diffuser parts leaving the standard grill in place I will have the Matt aluminium styling pack?

Audi (robbing s...s, but lovable rogues) want £800 for this but a rough estimate for the bumper/diffuser parts is coming in at £600?
 
T

T-800

Guest
Sorry just to clarify then if I swap the blades and rear diffuser parts leaving the standard grill in place I will have the Matt aluminium styling pack?

Audi (robbing s...s, but lovable rogues) want £800 for this but a rough estimate for the bumper/diffuser parts is coming in at £600?

Pretty much as you’ll already have the ali window trim if you have the ali grill surround.

So yes change the 3 pieces on the front bumper and the 3 pieces on the rear and your pretty much there.

Not cheap but doable.
 

Behind The Bins

Registered User
What about just wrapping the blades and bumper? I am sure that would be less assuming they have a Matt aluminum wrap.

Considered this as well removing and having them painted. Scared of stone chip damage to wrap, would want them removed for wrapping anyway so edges could be tucked over and no risk of a slipped knife mark
 

teslaboy

Mythos black RS3 8v FL
I've been considering this too.
Would be good to see the exploded views T-800 if you could provide as stated would be very helpful.
Might consider only adding the front centre lower alu blade see how it looks without the left and rights....
 
T

T-800

Guest
I've been considering this too.
Would be good to see the exploded views T-800 if you could provide as stated would be very helpful.
Might consider only adding the front centre lower alu blade see how it looks without the left and rights....



Here ye go

fffe4f2cff18a66612ce91417e0c9d17.jpg

8771af2ad0f1e7869aa4d31895d18975.jpg
 

teslaboy

Mythos black RS3 8v FL
Looking at the exploded views it's a shame the front blade middle section is not as wide as I'd hoped.
I'd quite like the front blade to be alu but not including the brake air scoops left and right !!
 

Behind The Bins

Registered User
Price requests gone out and the first response is in

FRONT BUMPER


8V5 807 533 AP6 ALUMINIUM MATT COVER TRIM CENTER £151.75

8V5 807 717 AP6 ALUMINIUM MATT FRONT SPOILER LEFT £134.10

8V5 807 718 AP6 ALUMINIUM MATT FRONT SPOILER RIGHT £134.10


REAR BUMPER


8V4 807 791 AP6 ALUMINIUM MATT TRIM CENTER £107.41

8V4 807 731 AP6 ALUMINIUM MATT COVER LEFT £122.94

8V4 807 732 AP6 ALUMINIUM MATT COVER RIGHT £122.94


I would be grateful if someone in the know can have a quick look at this and check I'm ordering the correct parts for a 2018 Sportback
 
T

T-800

Guest
Price requests gone out and the first response is in

FRONT BUMPER


8V5 807 533 AP6 ALUMINIUM MATT COVER TRIM CENTER £151.75

8V5 807 717 AP6 ALUMINIUM MATT FRONT SPOILER LEFT £134.10

8V5 807 718 AP6 ALUMINIUM MATT FRONT SPOILER RIGHT £134.10


REAR BUMPER


8V4 807 791 AP6 ALUMINIUM MATT TRIM CENTER £107.41

8V4 807 731 AP6 ALUMINIUM MATT COVER LEFT £122.94

8V4 807 732 AP6 ALUMINIUM MATT COVER RIGHT £122.94


I would be grateful if someone in the know can have a quick look at this and check I'm ordering the correct parts for a 2018 Sportback

Looks like the numbers in my parts pictures above.
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter
So about the best discount I can get is 10% before VAT on these parts, is that the best I'm going to get?

Yes that’s about as good as it gets I think without having a family friend or working for them. I have always found I can get a 5-10% discount on any parts just by asking for the best price.
 

royalsteve68

Registered User
Only issue is you can’t put ppf on it


Sent from my iPad using Tapatalk
 

RedRS3Reilly

Registered User
Sorry to revive an old thread but I’m looking to go the other way like yourself mate and retrofit Black Optics.

Have you had your front bumper surround & windows wrapped here?

It looks spot on in the pictures.
Yes they are wrapped mate
 

AudiNutta

Moderator
Staff member
Moderator
Gold Supporter

Jimmgc51

Registered User
Think I might be sold on wrapping then. Was looking to buy the grille but £900 is cheapest I’ve found it for from Germany so certainly not cheap to do it with factory parts
 

AlwaysBeenS3

Registered User
Sorry to revive an old thread but did anyone manage to get their parts wrapped to replicate the gloss black or aluminium pack?

Thinking of getting my gloss black bits on the facelift wrapped to replicate the aluminium pack, think it breaks up a dark car nicely
 

Jimmgc51

Registered User
I looked into it, was quoted £450 all in but mines a PFL.

There were pictures though on the company web site I was going to use of another guys FL that had been wrapped by them. Looked really good
 

Jimmgc51

Registered User
Vehicle wrapping centre

I’m in no way linked to these mind, just read a lot of reviews and these guys seemed to have a lot of positives. Also there are a few Audi RS models in their portfolio so can get a good idea of what you can get. They were on the higher side pricing wise but I’d rather pay more for a decent job.
 

AlwaysBeenS3

Registered User
Vehicle wrapping centre

I’m in no way linked to these mind, just read a lot of reviews and these guys seemed to have a lot of positives. Also there are a few Audi RS models in their portfolio so can get a good idea of what you can get. They were on the higher side pricing wise but I’d rather pay more for a decent job.

Thanks for that mate, yeah iv just had a look on their website and they do have quite a few Audis they have worked on
 

Ali Aktar

Registered User
Here ye go

fffe4f2cff18a66612ce91417e0c9d17.jpg

8771af2ad0f1e7869aa4d31895d18975.jpg
Hi would you be able to help I have a Audi s3 8V 2017 sportback I need the part numbers for the rear diffuser insert the 3 chrome pieces that run along the diffuser mine is originally black but any part numbers would be much appreciated some punks stolen mine
 
T

T-800

Guest
Hi would you be able to help I have a Audi s3 8V 2017 sportback I need the part numbers for the rear diffuser insert the 3 chrome pieces that run along the diffuser mine is originally black but any part numbers would be much appreciated some punks stolen mine

Ring your dealer.

Speak to their parts department.
 
Top