Rear electric windows has anybody retrofitted them?

mlody

Registered User
Joined
Feb 27, 2010
Messages
179
Reaction score
7
Im planning on fitting electric windows at the back, I have got the door harness and the 2 motors but In order to make it all working I need to change the pins in the connector in pillar B. Any1 ever done it before?
 

MarkWizard

Active Member
VCDS Map User
Joined
Jan 20, 2011
Messages
350
Reaction score
37
I'd be interested in doing this too mate
 

choimaloy

Registered User
Joined
Aug 24, 2009
Messages
113
Reaction score
1
How did you get on with this mate as I'm looking to do the same,got the door cards just need rear motors any thing else I need?
 

choimaloy

Registered User
Joined
Aug 24, 2009
Messages
113
Reaction score
1
For the rear motors now and gonna pick up the looms next week,what I don't understand is what pins need changing in the b pillar and why does this need to be done my understanding is that once the looms and motor is plugged in it should work.
 

SmoothAssault

Will design for mods
Joined
Dec 25, 2007
Messages
822
Reaction score
53
I have no first-hand experience in this, but I'd be very surprised if this didn't require some recoding. Did you get the front driver door card and switches too?
 

choimaloy

Registered User
Joined
Aug 24, 2009
Messages
113
Reaction score
1
Yeah got them to with the looms for the switches to so hopefully just the rear looms that go From the b pillar to the motor.
 

SmoothAssault

Will design for mods
Joined
Dec 25, 2007
Messages
822
Reaction score
53
Really interested to see how you get on with this, I hate my "keep fit" rear windows.
 
Top