Rear diffuser

Bulldog

Registered User
Joined
Mar 1, 2010
Messages
864
Reaction score
684
Points
93
Location
Kent
Wanted to get my rear diffuser painted gloss black on my Avant to keep with the black & silver theme I seem to be going for. Bought a secondhand black edition diffuser from eBay & had it painted gloss black for the princely sum of £50 which was an absolute bargain. I didn’t get the mesh insert painted as the guy said the paint would probably not stick to well so I cleaned it & gave it a coat of Gtechniq C4 trim restorer. I’ve also fitted some exhaust trims over the standard tailpipe trims to give a sort of quad exhaust look. I wasn’t sure how they’d look but for £17.99 from eBay I thought I’d give them a punt. Might not be to everyone’s tastes but the fit & quality are ok & they are easy to remove as only held on with double sided tape.


Before
2531094B 14F4 42FC 87A3 64BC8DD4B7D5


Diffuser removed
2A1CAE3E 8117 430D 9529 004E2AC68626


Diffuser painted
299292B4 EE62 4DC0 90E8 D8CEC51E7DA2


50/50 with the Gtechniq C4
5D879D7E 6311 4255 A109 E44FAAA2E26F


Mesh refitted
F170C890 8355 44FD BFDA D733475F45C9


All done
67A2B601 FC5D 4AFF A0A7 B85BF6D3E17A


5984FF33 0C1E 41AC B6C1 A137423CF19D


BA867B29 DD63 4D17 9D0B 03ABE497A128


Next job is to do the lip on the front but can’t seem to get it off so it’ll either be bumper off or get it wrapped gloss black in situ. Also did the front mesh grills with solution finish trim restorer to brighten them up.

ECCE177A B50B 414E AA70 54E794FFAB18


50/50 solution finish
09B2AD69 95D4 4836 8FBF 3B4B03F85FCA
 
  • Like
Reactions: Radford212, jojo, rjwojcik and 3 others
:thumbs up: Thanks then I’ll probably get the Maxton design front splitter as well.
 
  • Like
Reactions: The_Golfather
Wanted to get my rear diffuser painted gloss black on my Avant to keep with the black & silver theme I seem to be going for. Bought a secondhand black edition diffuser from eBay & had it painted gloss black for the princely sum of £50 which was an absolute bargain. I didn’t get the mesh insert painted as the guy said the paint would probably not stick to well so I cleaned it & gave it a coat of Gtechniq C4 trim restorer. I’ve also fitted some exhaust trims over the standard tailpipe trims to give a sort of quad exhaust look. I wasn’t sure how they’d look but for £17.99 from eBay I thought I’d give them a punt. Might not be to everyone’s tastes but the fit & quality are ok & they are easy to remove as only held on with double sided tape.


Before
View attachment 184646

Diffuser removed
View attachment 184650

Diffuser painted
View attachment 184648

50/50 with the Gtechniq C4
View attachment 184649

Mesh refitted
View attachment 184651

All done
View attachment 184652

View attachment 184654

View attachment 184655

Next job is to do the lip on the front but can’t seem to get it off so it’ll either be bumper off or get it wrapped gloss black in situ. Also did the front mesh grills with solution finish trim restorer to brighten them up.

View attachment 184656

50/50 solution finish
View attachment 184657

Look class loads better


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Bulldog
So nice with the gloss black diffuser, spot on :)
second the maxton design splitter. Only thing I don't like is the centre badge they put on the now, it is just a gel sticker but it is raised where the sticker goes when you remove it.
Saw a company called KSB autostyling are doing the splitters a cut under the price of maxton for the A5, and they are gloss black finish with no extra cost £99!
Maybe contact them to see about having one made for your 6?
 
  • Like
Reactions: Bulldog
@Meemo Thanks & I'll have a look at there site. I won’t be getting the splitter till after I’ve got my Kw’s fitted :yahoo:
 
@Bulldog how did you get the diffuser off the car? I've got a C7.5 (saloon) and bought some paint to change it to gloss black.
 
@sammy237 there’s just a few torx screws which hold it on then use a trim tool on the edges to get it to unclip.
 
  • Like
Reactions: sammy237