Problem in start engine

[Arcer]

Hi,
my a4 b7 cabrio 2.0 tdi sometimes didn't start. Audi dealer changed a rusty cable but the problem persist. With vag-com i've noticed this error:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8H - Audi Cabrio B6/B7
Scan: 01 02 03 08 09 0F 11 15 16 17 18 26 36 37 45 46 55 56 57 63
65 67 73 75 76 77

VIN: WAUZZZ8H67K020163 Mileage: 63870km/39686miles

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-910-517.lbl
Part No SW: 8E0 910 517 H HW: 8E0 614 517 BF
Component: ESP8 FRONT H06 0140
Revision: 00000000 Serial number: 00000000000000
Coding: 0004405
Shop #: WSC 00672 785 00200
VCID: 2C530083F69B

1 Fault Found:
01314 - Engine Control Module
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 1
Fault Frequency: 2
Reset counter: 38
Time Indication: 0

Freeze Frame:
Hex Value: 0x00C0
Hex Value: 0x0722
Hex Value: 0x0014
Hex Value: 0x4198
Hex Value: 0x0001


-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8EC.lbl
Part No SW: 8H0 920 900 K HW: 8H0 920 900 K
Component: KOMBI+WFS 4 H14 0110
Revision: 0110 Serial number: 00000000000000
Coding: 0006111
Shop #: WSC 00875 264 135294
VCID: 2F69178FC78D

1 Fault Found:
01314 - Engine Control Module
004 - No Signal/Communication - Intermittent




help me plz

 

[Arcer]

these are the ligth that fire when i turn on the instrument panel
http://youtu.be/dUBXyfDejjY