Power steering pump replacement

[AGB-S3]

After 200,000 miles and re-con rack, the pump is waving the white flag ..
Q Ideas as to workshop time required ?
Simple job, or need to take front off etc ?

Tnx- Graham

 

[Zans]

Pretty simple. Untighten the 3 bolts holding the pulley, remove the v-belt, remove the plug to the switch, disconnect the 2 lines going to the pump and drain the fluid. Proceed to remove the 3 (or 2) bolts holding the pump. Transfer the pulley to the new pump and make sure to torque the pulley bolts to spec.