Post your eBay, Classified and For Sale links and wanted in here. Do not create a thread.

^^^^ just replaced the same one. it was painful but oem is best. mine was hit from the road and so disheartening to walk to my car and see the damage. gutted for you
 
^^^^ just replaced the same one. it was painful but oem is best. mine was hit from the road and so disheartening to walk to my car and see the damage. gutted for you
you have part code? everyone want to sell me whole mirror that I dont need
 
Hi all, I am selling my H&R lowering springs (35mm all around) and Bilstein B8 shock absorbers for 55mm strut Audi A3 8P. I purchased them in July 2015 so they are still under warranty. I have only used them for around 4000 miles so they're in mint condition. I will post pictures soon. I am based in NW London and looking to sell at £600. PM me for more info.
 
Hi all, I am selling my H&R lowering springs (35mm all around) and Bilstein B8 shock absorbers for 55mm strut Audi A3 8P. I purchased them in July 2015 so they are still under warranty. I have only used them for around 4000 miles so they're in mint condition. I will post pictures soon. I am based in NW London and looking to sell at £625. PM me for more info.
Here is a picture. Ad also on Ebay.
eBay item number:
232160990882
 

Attachments

  • IMG_0045.JPG
    IMG_0045.JPG
    436.8 KB · Views: 268
Carbon mirror covers s3 8p, first facelift model
d1a3971bb875a628a26581d94e124a3f.jpg
1b202bafeede7611aa08dde26448fc60.jpg
862f419a13b81b294513bb9bea581184.jpg
a43bea390db934ed715f22f0bfbc8c76.jpg


160 or nearest offer. Pm for more info

Sent from my SM-G925F using Tapatalk
 
  • Like
Reactions: S. and derekw
WANTED:

AUDI A3 SLINE REAR BUMPER OR
AUDI S3 REAR BUMPER!

MUST BE 3 door. Thanks.
 
Looking for rear facelift sportback lights. I am located in Eastern Europe.
 
Looking for an rs3 grill in black. Preferably xenons. If anyone is putting their car back to standard
 
Anyone got any
50mm - 55mm Front Strut Size Adaptor Sleeves
 
WANTED..

Black leather armrest. Doesn't matter if the clip is broke or not as I'll fix it if it's broke.
 
S l1600 1 S l1600 2 S l1600

Audi A3 2.0 TDI PD 138 Bhp / 140 PS / 103 KW PD Diesel Tuning Box Chip - £60 + bit of postage (call it £65 posted)

link for info here

Works perfectly on these cars and from a reputable company (not an ebay resistor)

Only selling as returning car to standard (selling) plug and play performance
 
20161230 150441 20161230 150558 20161230 150602 20161230 150605 20161230 150608 20161230 150611 20161230 150614

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)
 
  • Like
Reactions: Pergan
View attachment 113532 View attachment 113533 View attachment 113534 View attachment 113535 View attachment 113536 View attachment 113537 View attachment 113538

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)

Was this installed with the new version of RNS-E? And did it work or any issues?
 
Was this installed with the new version of RNS-E? And did it work or any issues?

I had it wired to an RNSE unit (G model) it needs to have the RFSL input on it.. I know why your asking.. because i also read multiple things about this 1) it "cant" be done 2) it can be done - it seems due to the new units well being new information is hard to come by - the install was pretty fiddly

I looked into it and sometimes the later models of RNSE dont switch off the camera feed after its used, something to do with the switch on RFSL/firmware - which is why in addition to this wiring put another wire between the reverse + live and the RFSL switch (i.e so it had two one to trigger it and one to trigger it back off) - basically when reverse lights trigger so does the camera feed - had it all working just perfectly - in memory i think my unit froze once but that was due to my SD card i think and not this

that being said i would rather not sell it for someone to say "it doesnt work" thats just my translation of what i had working, unless it was a total pure luck the setup worked fine for me
 
I'm selling a RamAir cone filter and heat shield induction kit, model JSK-123-BK. More information is available at , I've taken it off my A3 MY09 1.8 TFSI but it also fits the A3 2.0 too.

It's been in the car for about 5 weeks and had covered less than 100 miles. Selling as the car is for sale so putting back to standard.

I'm looking for about £80 + delivery.

Cheers

IMG 0143



IMG 0341
 
17" Alloys and Goodyear tyres

I have a set of 17" 5x112 alloys for sale taken from my A3 8P 2010 model. No cracks or welds. Genuine Audi wheels. Recently powder coated in Ferric Grey 2 so look great against dark and light cars. No marks on them or the tyres

They come with 4 Goodyear Eagle F1 Aysemetric 2 tyres with around 5mm minimum on each tyre.

Wheels won't come with the centre caps as I'm keeping them for my new ones.

Looking for £350 o.n.o

Collection from Leeds

40A53304 1A33 44D0 BB71 8D34E8FBB365
25C80C44 6C19 4614 94FD 14280C1C6431
 
A3 S line mfsw for sale. Removed from 2010 s line. For sale as I've now got a flat bottom wheel. Perfect working order, 1 little mark that can't really be seen.
Comes with airbag. Looking for £150 Ono.
 

Attachments

  • IMG_2439.JPG
    IMG_2439.JPG
    994.9 KB · Views: 193
Thanks for the link to TDI-Tuning. I never heard of this company and thought that only DTUK made quality tuning boxes. I ordered a CRDT4 TWIN Channel box from TDI-tuning yesterday.
 
  • Like
Reactions: Sandra and avatarz
Heated rear seats

I bought these from Darren92 and never got round to fitting them, they were originally in Ash old A3

You'll get 2x bottom elements and 2x backrest elements. You'll also get the wiring harness which links the backrest to the main bottom harness, along with this you'll get the main "car" harness which will link the seat harnesses with the car.

You also get the switches, switch mounting and trim piece.

IMG 2858 IMG 2857 IMG 2856 IMG 2855 IMG 2854 IMG 2853 IMG 2852 IMG 2851 IMG 2850 IMG 2849 IMG 2848 IMG 2847 IMG 2846

I'm wanting £250 + postage please. Cheers Russ
 
  • Like
Reactions: Inertiauk and Ash187
Hi I notice you've ordered a tuning box, I wondered what age and what engine it was for as I'm considering getting one for my 140bhp 2012 a3
 
View attachment 113532 View attachment 113533 View attachment 113534 View attachment 113535 View attachment 113536 View attachment 113537 View attachment 113538

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)

This is now SOLD
 
Has it made any difference? You think it's worth the money?
I didn't install it yet. The boost connector is accessible from beneath the car only. I need a lift, but one I used to rent was in use by its owner all the time.
 
Morning everyone,

Selling my original climate interface WITH heated seats from my 2012 sportback. car had only done 30,000 miles when removed, it's in immaculate condition. Selling it because i have upgraded to a Q3 interface

Leeds £95

Part No: 8p0820043BN
Build date 01.12.11

Will get some pics up this afternoon when I get home, or PM me and I can FB, email or whatsapp

Have good day

Matt