Post your eBay, Classified and For Sale links and wanted in here. Do not create a thread.

tcardio

Registered User
^^^^ just replaced the same one. it was painful but oem is best. mine was hit from the road and so disheartening to walk to my car and see the damage. gutted for you
 

viper95

Registered User
^^^^ just replaced the same one. it was painful but oem is best. mine was hit from the road and so disheartening to walk to my car and see the damage. gutted for you
you have part code? everyone want to sell me whole mirror that I dont need
 

plasma

Registered User
Hi all, I am selling my H&R lowering springs (35mm all around) and Bilstein B8 shock absorbers for 55mm strut Audi A3 8P. I purchased them in July 2015 so they are still under warranty. I have only used them for around 4000 miles so they're in mint condition. I will post pictures soon. I am based in NW London and looking to sell at £600. PM me for more info.
 

plasma

Registered User
Hi all, I am selling my H&R lowering springs (35mm all around) and Bilstein B8 shock absorbers for 55mm strut Audi A3 8P. I purchased them in July 2015 so they are still under warranty. I have only used them for around 4000 miles so they're in mint condition. I will post pictures soon. I am based in NW London and looking to sell at £625. PM me for more info.
Here is a picture. Ad also on Ebay.
eBay item number:
232160990882
 

Attachments

  • IMG_0045.JPG
    IMG_0045.JPG
    436.8 KB · Views: 231

bb21

Registered User
Carbon mirror covers s3 8p, first facelift model
d1a3971bb875a628a26581d94e124a3f.jpg
1b202bafeede7611aa08dde26448fc60.jpg
862f419a13b81b294513bb9bea581184.jpg
a43bea390db934ed715f22f0bfbc8c76.jpg


160 or nearest offer. Pm for more info

Sent from my SM-G925F using Tapatalk
 

j1sgo

Registered User

samuelh_888

Registered User

avatarz

Registered User
s-l1600 (1).jpg s-l1600 (2).jpg s-l1600.jpg

Audi A3 2.0 TDI PD 138 Bhp / 140 PS / 103 KW PD Diesel Tuning Box Chip - £60 + bit of postage (call it £65 posted)

link for info here

Works perfectly on these cars and from a reputable company (not an ebay resistor)

Only selling as returning car to standard (selling) plug and play performance
 

avatarz

Registered User
20161230_150441.jpg 20161230_150558.jpg 20161230_150602.jpg 20161230_150605.jpg 20161230_150608.jpg 20161230_150611.jpg 20161230_150614.jpg

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)
 

FredrikA3

Registered User
View attachment 113532 View attachment 113533 View attachment 113534 View attachment 113535 View attachment 113536 View attachment 113537 View attachment 113538

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)

Was this installed with the new version of RNS-E? And did it work or any issues?
 

avatarz

Registered User
Was this installed with the new version of RNS-E? And did it work or any issues?

I had it wired to an RNSE unit (G model) it needs to have the RFSL input on it.. I know why your asking.. because i also read multiple things about this 1) it "cant" be done 2) it can be done - it seems due to the new units well being new information is hard to come by - the install was pretty fiddly

I looked into it and sometimes the later models of RNSE dont switch off the camera feed after its used, something to do with the switch on RFSL/firmware - which is why in addition to this wiring put another wire between the reverse + live and the RFSL switch (i.e so it had two one to trigger it and one to trigger it back off) - basically when reverse lights trigger so does the camera feed - had it all working just perfectly - in memory i think my unit froze once but that was due to my SD card i think and not this

that being said i would rather not sell it for someone to say "it doesnt work" thats just my translation of what i had working, unless it was a total pure luck the setup worked fine for me
 

samuelh_888

Registered User
I'm selling a RamAir cone filter and heat shield induction kit, model JSK-123-BK. More information is available at , I've taken it off my A3 MY09 1.8 TFSI but it also fits the A3 2.0 too.

It's been in the car for about 5 weeks and had covered less than 100 miles. Selling as the car is for sale so putting back to standard.

I'm looking for about £80 + delivery.

Cheers

IMG_0143.JPG



IMG_0341.JPG
 

Bradley Lister

Registered User
17" Alloys and Goodyear tyres

I have a set of 17" 5x112 alloys for sale taken from my A3 8P 2010 model. No cracks or welds. Genuine Audi wheels. Recently powder coated in Ferric Grey 2 so look great against dark and light cars. No marks on them or the tyres

They come with 4 Goodyear Eagle F1 Aysemetric 2 tyres with around 5mm minimum on each tyre.

Wheels won't come with the centre caps as I'm keeping them for my new ones.

Looking for £350 o.n.o

Collection from Leeds

40A53304-1A33-44D0-BB71-8D34E8FBB365.jpg
25C80C44-6C19-4614-94FD-14280C1C6431.jpg
 

ab1702

Registered User
A3 S line mfsw for sale. Removed from 2010 s line. For sale as I've now got a flat bottom wheel. Perfect working order, 1 little mark that can't really be seen.
Comes with airbag. Looking for £150 Ono.
 

Attachments

  • IMG_2439.JPG
    IMG_2439.JPG
    994.9 KB · Views: 167

Pergan

Registered User
Wanted

S3 Side Skirts 3-Door OEM, not interested in aftermarket skirts!
 

Oldredeyes1

Registered User
Heated rear seats

I bought these from Darren92 and never got round to fitting them, they were originally in Ash old A3

You'll get 2x bottom elements and 2x backrest elements. You'll also get the wiring harness which links the backrest to the main bottom harness, along with this you'll get the main "car" harness which will link the seat harnesses with the car.

You also get the switches, switch mounting and trim piece.

IMG_2858.JPG IMG_2857.JPG IMG_2856.JPG IMG_2855.JPG IMG_2854.JPG IMG_2853.JPG IMG_2852.JPG IMG_2851.JPG IMG_2850.JPG IMG_2849.JPG IMG_2848.JPG IMG_2847.JPG IMG_2846.JPG

I'm wanting £250 + postage please. Cheers Russ
 

M brogan

Registered User
Hi I notice you've ordered a tuning box, I wondered what age and what engine it was for as I'm considering getting one for my 140bhp 2012 a3
 

avatarz

Registered User
View attachment 113532 View attachment 113533 View attachment 113534 View attachment 113535 View attachment 113536 View attachment 113537 View attachment 113538

As you can see from the VW box this came from VW/Audi and the handle assembly was £450 alone

This is a full kit to wire up a reverse camera with the RNSE units and comes with the wiring (plug and play connectors)

Im told the assembly will also fit A4, A6 (quite a few Audis as long as you have RNSE unit)

Looking to get £150 all in posted for it

Only selling as returning car to standard (selling)

This is now SOLD
 

spencer361

Registered User
Morning everyone,

Selling my original climate interface WITH heated seats from my 2012 sportback. car had only done 30,000 miles when removed, it's in immaculate condition. Selling it because i have upgraded to a Q3 interface

Leeds £95

Part No: 8p0820043BN
Build date 01.12.11

Will get some pics up this afternoon when I get home, or PM me and I can FB, email or whatsapp

Have good day

Matt
 
Top