Post your B7 eBay, Classified and For Sale links in here. Do not create a thread

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
Wanted ASAP if possible.
I require a B7 s-line rear offside (driverside) door blade, colour and outside paint condition not an issue but must have a perfect inside to the blade with no rust or damage, and the locking / sliding tabs must be undamaged.

drop me a line if you have one and a price.

rob.
 

Jamie Bishop

Registered User
https://m.ebay.co.uk/itm/audi-a4-2-0-tfsi-quattro-/282877706480

After going through this fsh car with a fine tooth comb. Spending over a grand on it this year. I've decided to go the finance route on a transit van for work.

I've had the cam belt, water pump, oil and filter, fuel pollen and air filter.

New brake fluid and finally a new heater matrix.

The wheels are in good nick and refurbished last year. There's a small scuff on one.

The spare has a brand new continental tyre on a refurbished perfect rim.

It's been clayed polished and waxed. New pierburg revision d diverter valve.

CAM follower checked. Also comes with a spare.

FULL service history.

Open to offers from forum members. Any test drive welcome. All tyres are good and it's been checked over on ramps and the suspension components and bushes are perfect.

New shocks at 100k. Receipts to prove.

Thanks everyone.
 

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
looks ideal , shame about the rings and the repairs but at the right price a bargain, good find martin.
 

tony mc

Registered User
Hello people, not been on for ages, hope everyone's been well,

right then for sale are my brembo, 1LE 4 pot calipers, with used pads if needed, and with the fitting kit, (inc, bolts, nuts, washers and bolt sleeve's) also the Hel braided brake lines, no disc though, looking for offers around £250 excluding postage, reason for removing is the cars going to be going back to almost standard, i need a van for work and i know once i have the van the a4 will be on the back shelf so it's going up for sale, sad days i'm afraid. i've give them a quick rinse for the pics but they will clean up a bit bettrer. they are in good working order and have been fine on my car for a year and a half.
20180325_135857.jpg
20180325_135908.jpg
20180325_135914.jpg
 
Last edited:

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
I did wonder chap, sad to see you selling up but makes sense really if you wont be using it now, so one more A4 less owner soon to be .....sad day chap, sad day.
Good luck with things though.

cheers
rob
 

tony mc

Registered User
Hello people, not been on for ages, hope everyone's been well,

right then for sale are my brembo, 1LE 4 pot calipers, with used pads if needed, and with the fitting kit, (inc, bolts, nuts, washers and bolt sleeve's) also the Hel braided brake lines, no disc though, looking for offers around £250 excluding postage, reason for removing is the cars going to be going back to almost standard, i need a van for work and i know once i have the van the a4 will be on the back shelf so it's going up for sale, sad days i'm afraid. i've give them a quick rinse for the pics but they will clean up a bit bettrer. they are in good working order and have been fine on my car for a year and a half.
View attachment 151628 View attachment 151629 View attachment 151630

Sold, thanks all.
 

martin1984

Registered User
Rs4 grill only 45mins left still at a good price i would if i had the money
282916972852

Sent from my SM-A300FU using Tapatalk
 

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
WANTED 2x avant fwd sline rear only springs
there's a good set sitting in my garage free if you want them martin , they are avant quattro but will be fine on your fwd as it's the rears .
well springs are free to you but you need to add postage .
 

martin1984

Registered User
there's a good set sitting in my garage free if you want them martin , they are avant quattro but will be fine on your fwd as it's the rears .
well springs are free to you but you need to add postage .
Yea defo please Rob if your giving them away as my coilovers are to low for my new drive way even on the highest setting do you have any tips on removing the rear Springs as could do without having to go back to the garage to do it thanks

Sent from my SM-G930F using Tapatalk
 

i3oricua

Registered User
Yea defo please Rob if your giving them away as my coilovers are to low for my new drive way even on the highest setting do you have any tips on removing the rear Springs as could do without having to go back to the garage to do it thanks

Sent from my SM-G930F using Tapatalk

Release the subframe bolts as far as they will go. Some say not to take them off but I have with no problems. I think most are afraid of their subframe becoming unaligned.


Sent from my iPhone using Tapatalk
 

martin1984

Registered User
Yea im one of those ppl i dont trust myself sometimes or something will go wrong knowing my luck
Release the subframe bolts as far as they will go. Some say not to take them off but I have with no problems. I think most are afraid of their subframe becoming unaligned.


Sent from my iPhone using Tapatalk

Sent from my SM-A300FU using Tapatalk
 

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
Yea defo please Rob if your giving them away as my coilovers are to low for my new drive way even on the highest setting do you have any tips on removing the rear Springs as could do without having to go back to the garage to do it thanks

Sent from my SM-G930F using Tapatalk

yours martin, pm me your postcode and i'll get a postage cost...
 

aarroncolley

Registered User
9c676590d84cef7cfc34414923fb4dc8.jpg


Selling my air ride kit. V2 management running d2 struts and bags on the front and airlift performance bags and shocks on the rear. All works as should and currently still on the car. Manifold is currently in manual mode due to the pressure sensor being faulty meaning you can save ride heights but the kit will come with the newer 3p manifold which is still brand new in the box just need the main wire harness and controller.

Looking for £1300/£1400 Ono

Can be seen working and won’t be taken off the car until I get genuine interest

Thanks


Sent from my iPhone using Tapatalk
 

OliNix

Registered User
9c676590d84cef7cfc34414923fb4dc8.jpg


Selling my air ride kit. V2 management running d2 struts and bags on the front and airlift performance bags and shocks on the rear. All works as should and currently still on the car. Manifold is currently in manual mode due to the pressure sensor being faulty meaning you can save ride heights but the kit will come with the newer 3p manifold which is still brand new in the box just need the main wire harness and controller.

Looking for £1300/£1400 Ono

Can be seen working and won’t be taken off the car until I get genuine interest

Thanks


Sent from my iPhone using Tapatalk

What variant is this for and whereabouts are you?
 
Eibach pro street coilovers used for just over a year. Genuine reason for sale is because I went to air.

This was on my Audi A4 DTM. Not to sure if it will fit 2wd but definitely a Quattro.

Looking for about £500 Ono
1cdee0ae7f20be0865e327d75e918d51.jpg
2017f04548318e53d948d167ea681651.jpg



Sent from my iPhone using Tapatalk
 

Paul battams

Active Member
VCDS Map User
For sale BV50 hybrid turbo built by AET turbos 2 1/2 yrs old covered approx 15k when mapped with support mods it ran 325 BHP on my 3.0 BKN engine only thing that you’ll need is your mounting bracket as I used this on my new turbo actuator is plug and play £600 open to sensible offers
I’m located in Goole Yorkshire


Sent from my iPhone using Tapatalk
80e3b747e4d7327d83eaea7e6e3ccc15.jpg
a0e24dd786e90f384b74161d2d5bcaaa.jpg
31cd72203e9e224befd373a1a040a38c.jpg
ce1adc5eb369583c0fa0e13239d37491.jpg
5a6a605f8baff29283631c6ab3402d7f.jpg
 

Paul battams

Active Member
VCDS Map User
For sale we have a set of front discs pads and calipers taken off my 05 3.0tdi Quattro discs are 300mm vented brembo pads are ferrodo ds2500 audi calipers with braided hoses these were only removed for an upgrade disc holes are 5x112 holes £175 or open to sensible offers located in Goole Yorkshire
4e9a74ce9693f4b64f713df0441d184b.jpg
ad2a95678a243b81c316fd89145f5831.jpg
5987b279980bd48872a69c774038dc18.jpg
fabfda0bf220fcbbe532869228f74c98.jpg



Sent from my iPhone using Tapatalk
 

OliNix

Registered User
For sale BV50 hybrid turbo built by AET turbos 2 1/2 yrs old covered approx 15k when mapped with support mods it ran 325 BHP on my 3.0 BKN engine only thing that you’ll need is your mounting bracket as I used this on my new turbo actuator is plug and play £600 open to sensible offers
I’m located in Goole Yorkshire


Sent from my iPhone using Tapatalk
80e3b747e4d7327d83eaea7e6e3ccc15.jpg
a0e24dd786e90f384b74161d2d5bcaaa.jpg
31cd72203e9e224befd373a1a040a38c.jpg
ce1adc5eb369583c0fa0e13239d37491.jpg
5a6a605f8baff29283631c6ab3402d7f.jpg

When you say support mods, how far did you go?
 

Bradderz_1988

Dont replace it, Upgrade it !!
A4 DTM exhaust

Tailpipes need a clean

Upgraded to a milltek Non Res System so going cheap.

Pick up from bolton

£75ono

4002B44E-8960-43E4-9C58-675E4DD84264.jpeg
 

I'm Just Rob.

Moderating or something,
Staff member
Moderator
VCDS Map User
Gold Supporter
FOR SALE.
Selling my 19" alloys again and they must go this time.
prof refurbed a few months ago in audi platinum silver finish and they look very nice, no marks or scuffs and centre caps are included.

19" 5x112 8j ET35 offset X4 maybe a matching fifth aswell if your lucky.
they owe me a fair bit now after 3 colour changes but just looking to recoupe my initial outlay really.
bare rims only no rubber included collection preferred but can ship at buyers cost.

one price chaps and that is £300 for the 4 , we can haggle over price if you want the fifth.

drop me a line if interested , they are available from Tuesday the 10th of july.
ally2.JPG
 

aarroncolley

Registered User
09772e40eaf891e3dcd057949488ffb3.jpg
277c49fb56bb913b3f864dc675e4b07b.jpg


Selling my not very old rota grids and air ride off my a4 if anyone’s interested feel free to inbox me for more info.

Wheels £500 new front tyres good tread on rear.

Air ride £700


Sent from my iPhone using Tapatalk
 

YorkieTom

Registered User
Selling this lot.

320mm Front Drilled Brembo Disks - Brand new in box
320mm Brembo Pads - Brand new in box
320mm OEM Calipers painted red (unused since painted)+Carriers+shields (taken from a 2.0TFSI@55k/JustRob)

£300 for the lot

HEL stainless steel braided hoses front and rear - Black - Brand new in box - £75

£360 everything with hoses


Postage not included

photos in this thread
https://www.audi-sport.net/xf/threa...rake-setup-tfsi-or-upgrade-for-2-0tdi.378227/
 

Nathan Russell

Registered User
For sale BV50 hybrid turbo built by AET turbos 2 1/2 yrs old covered approx 15k when mapped with support mods it ran 325 BHP on my 3.0 BKN engine only thing that you’ll need is your mounting bracket as I used this on my new turbo actuator is plug and play £600 open to sensible offers
I’m located in Goole Yorkshire


Sent from my iPhone using Tapatalk
80e3b747e4d7327d83eaea7e6e3ccc15.jpg
a0e24dd786e90f384b74161d2d5bcaaa.jpg
31cd72203e9e224befd373a1a040a38c.jpg
ce1adc5eb369583c0fa0e13239d37491.jpg
5a6a605f8baff29283631c6ab3402d7f.jpg

Did you shift this mate?
 

martin1984

Registered User
Clear corner lense for de tango mod on your headlights give it the ome look eather than just removing the orange lense.
2xclear lense and 2x chrome blub.
Looking for £45 posted

Sent from my SM-G930F using Tapatalk
ea99c644c36c38b6b7781683f73774cd.jpg
 
Top