PFL to FL Dynamic Taillights conversion guide

CORTEZ72

New Member
Guys,

I Wan't to make this retrofit and i have FL Sportback with halogen tail light, some one already do it ? unfortunately is more difficult than a retrofit from a PFL led.

If some one can share diagram of the BCM of an Halogen FL and Dynamic FL. Because no one give clearly the info about that ...

if you have any info could be help full for me.

thanks
 

ZeA38VSport

Registered User
Guys,

I Wan't to make this retrofit and i have FL Sportback with halogen tail light, some one already do it ? unfortunately is more difficult than a retrofit from a PFL led.

If some one can share diagram of the BCM of an Halogen FL and Dynamic FL. Because no one give clearly the info about that ...

if you have any info could be help full for me.

thanks
I have replied to your message in another post I think.. let me know how you doing with this retrofit
 

yakev724

New Member
Any tips on NAR pre-FL LED -> NAR FL Dynamic retrofit? Outer lights have 5 pins, not 6 like the EU versions...

About to buy the housings/pins and experiment.
 

ZeA38VSport

Registered User
Any tips on NAR pre-FL LED -> NAR FL Dynamic retrofit? Outer lights have 5 pins, not 6 like the EU versions...

About to buy the housings/pins and experiment.
PFL US model LED cluster Light:
Left Outer (6pin connector):
Pin 5=Brown (Ground)
Pin 3=Blue (Left brake and turn signal bulb 2)
Pin 2= Blue/Yellow (Left brake and turn signal bulb)
Pin 1= Blue/White (Rear left side marker bulb) >>links to Pin 4-Red/Brown >> links to Left Inner

Left Inner (8pin connector)
Pin 4= Red/Brown (Left tail light bulb)
Pin 6= Grey (Left brake and turn signal bulb 3)
Pin 7= Red/White (Rear left fog light bulb)
Pin 1= Blue/Black (Left reversing light bulb)
Pin 8= Brown (Ground)

Right Inner (8pin connector)
Pin 2=Brown (Ground)
Pin 7=Red/Green (Right reversing light bulb)
Pin 1=Green/Yellow (Rear right fog light bulb)
Pin 6=Red/Brown (Right brake and turn signal bulb 3)
Pin 4= Yellow/Brown (Right tail light bulb) >>links to Right Outer>>Yellow/Brown Pin 4 of 6 pin connector

Right Outer (6 pin connector)
Pin 4=Yellow/Brown >>links to Pin 1
Pin 1=Red/Green (Rear right side marker bulb)
Pin 2=Purple/Brown (Right brake and turn signal bulb)
Pin 3=Green/Brown (Right brake and turn signal bulb 2)
Pin 5=Brown (Ground)
 

ZeA38VSport

Registered User
PFL US model LED cluster Light:
Left Outer (6pin connector):
Pin 5=Brown (Ground)
Pin 3=Blue (Left brake and turn signal bulb 2)
Pin 2= Blue/Yellow (Left brake and turn signal bulb)
Pin 1= Blue/White (Rear left side marker bulb) >>links to Pin 4-Red/Brown >> links to Left Inner

Left Inner (8pin connector)
Pin 4= Red/Brown (Left tail light bulb)
Pin 6= Grey (Left brake and turn signal bulb 3)
Pin 7= Red/White (Rear left fog light bulb)
Pin 1= Blue/Black (Left reversing light bulb)
Pin 8= Brown (Ground)

Right Inner (8pin connector)
Pin 2=Brown (Ground)
Pin 7=Red/Green (Right reversing light bulb)
Pin 1=Green/Yellow (Rear right fog light bulb)
Pin 6=Red/Brown (Right brake and turn signal bulb 3)
Pin 4= Yellow/Brown (Right tail light bulb) >>links to Right Outer>>Yellow/Brown Pin 4 of 6 pin connector

Right Outer (6 pin connector)
Pin 4=Yellow/Brown >>links to Pin 1
Pin 1=Red/Green (Rear right side marker bulb)
Pin 2=Purple/Brown (Right brake and turn signal bulb)
Pin 3=Green/Brown (Right brake and turn signal bulb 2)
Pin 5=Brown (Ground)
Right that took some time lol
 
Top