Morning all, Currently collecting parts for later in the year when my PFL S3 saloon runs out of warranty, so far I have H&R 20mm springs, RS3 grille, Maxton carbon splitter & carbon spoiler Looking for options on the rear diffuser, Rieger don't seem to do one for the saloon? if anybody has links please share, or if anybody has fit one then pics would be great, many thanks
Ill be ordering one from AliExpress, about to order the Maxton splitter and the side skirts for this month How do you find the carbon look? I was less than impressed with the pictures Maxton sent me...
You have a link to the one you will be ordering? I'll let you know on the Maxton should be here this week, ordered it yesterday Sent from my SM-G960F using Tapatalk
Yeah sure, this is the one I will more than likely be getting https://www.aliexpress.com/item/A3-...b687-48f3-95aa-b06e41e52b49&priceBeautifyAB=0 Ops, sorry for the long link Yeah keep me updated if you can about the splitter...I think ill be going gloss black on mine on everything on the bottom half...then for either gloss black wing mirror covers or carbon ones
If it's poor quality it will be going back, managed to find a 10% off voucher as well Sent from my SM-G960F using Tapatalk
Has anybody for one of the Aliexpress rear diffusers to a saloon? Care to share pictures and experience with fitting Sent from my SM-G960F using Tapatalk
Was the 10% voucher JamieST2016? The gloss black one looks spot on so ill stick with that I think...should be ordering mine in the next few days
Ive used AliExpress on a number of cars now including our R32 Golf Mk5...that had a full on carbon rear diffuser and TBH it was ok...more than acceptable...it just needed holding in place while bolting in due to the extra stiffness from the carbon itself...but nothing I wasnt prepared for Same with mirror caps, lots of other random stuff really...all been spot on Looking at UK/US/Euro prices of what look like the same products, I know im going straight to the far east and cutting out the middle man...if its not right, then ill use one of the more reputable suppliers...but if you dont try you wont know! Im pretty sure thats where all these companies get their parts from anyway
Found this one, a bit pricey but in the UK https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/162615893908 Sent from my SM-G960F using Tapatalk
Been trying to order this for 5 days now, website constantly crashing on checkout?? Sent from my SM-G960F using Tapatalk
I’m guessing they just import them from an external supplier and wack on a huge margin on them just because they can.
They say they manufacture in house, but don't currently have any due to reworking the mould they use, hence me importing one from China, will be interesting to see the quality & fit
This arrived Friday, anybody got a link to a guide on rear bumper removal Sent from my SM-G960F using Tapatalk
I'm sure I posted this the other day. Again I accept no responsibility. Takes 20-30 mins to take off. Trickiest bit is getting to the nuts in the back valence really deep 10mm socket needed. www.audiworld.com/forums/audi-a3-s3-rs-3-mkii-209/a3-8v-s-line-bumper-removal-towbar-install-guide-2920541/
All I will say is make sure you check your bumper against the boot shut lines. My first attempt was well off. Not much movement but enough for it to be off. Be brave but cautious when pulling the sides of the bumper out from the rear wings. Any snags mate just give me a PM. I'll try my best to run you through any issues.
https://m.aliexpress.com/item/32417...32417510728&shortkey=meiYRRZN&addresstype=600 Sent from my SM-G960F using Tapatalk
i have been thinking to get front bumper carbon lips and rear carbon diffuser since i got RS3 grills from aliexpress i think my A3 need these two for aggressive/ sporty look, from where did u got the trunk spoiler?
I think the company I got my carbon one from do it in gloss black mate Sent from my SM-G965F using Tapatalk