1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dismiss Notice

Options for Bluetooth

Burnsycaz71 Feb 22, 2020

  1. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    Hey guys I have the symphony with cd changer also have Audi nav in boot but don’t have sat nav screen
    Can I ad Bluetooth if so is it plug and play
    Also any ideas what the second pic is of and what it’s for
    Thanks
     

    Attached Files:

  2. Avatar

    snack-media
    Advertisement


  3. s8craig

    s8craig Well-Known Member VCDS Map User

    1,853
    67
    48
    If you have a MFSW and DIS you can fit the genuine Audi bluetooth or compatible, otherwise a 3rd party parrot etc would interface with the TEL input and MUTE pins of the symphony.
     
  4. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    Thanks don’t have the MFSW
     
  5. J0N

    J0N Well-Known Member

    489
    287
    63
    If it’s just phone prep you’re after, you could try one of these...
    [​IMG]
    I’ve just sold this one but there’s loads on eBay around the 50 quid mark. They’re by no means plug and play though, they need to be coded in with VCDS.


    Sent from my iPhone using Tapatalk
     
  6. J0N

    J0N Well-Known Member

    489
    287
    63
    Having said that, I have MFSW and DIS.


    Sent from my iPhone using Tapatalk
     
  7. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    It’s just to stream music
     
  8. J0N

    J0N Well-Known Member

    489
    287
    63
    I’d say you’re better going aftermarket...


    Sent from my iPhone using Tapatalk
     
  9. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    Ok thanks
    Any ideas of what is needed wiring or adapters or is straight forward plug and play
     
  10. J0N

    J0N Well-Known Member

    489
    287
    63
    For aftermarket? You can get plug and play wiring harnesses, the price depends on what factory options you have. In my case, I have full Bose and MFSW. The wiring harness was £82 inc patch cables, expensive but simple to fit with absolutely zero interference.


    Sent from my iPhone using Tapatalk
     
  11. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    That’s great thanks don’t have BOSE as it says blaupunkt in the boot and no MFSW
     
    J0N likes this.
  12. Avatar

    snack-media
    Advertisement


  13. s8craig

    s8craig Well-Known Member VCDS Map User

    1,853
    67
    48
    You cannot stream music on the Audi Bluetooth interface, on some third party ones you can but its only in mono.

    I would suggest a bluetooth streaming addon to the CD interface, even though you have 6 CD changer in the dash, the symphony is equipped with a CD changer port and an interface can be added to that to fool the Symphony as CD changer is attached but you stream your music to it. You will not get any track information etc, just the audio feed.

    If you fit something like the Dension GW 100 Ipod interface and then plug a certain Bluetooth adaptor on the end of that 30 pin plug, it can stream and you can change tracks and I think even get track information from an Iphone, but not an android device.
     
  14. Burnsycaz71

    Burnsycaz71 New Member

    21
    2
    3
    Ah ok thanks I will check that out
     
  15. J0N

    J0N Well-Known Member

    489
    287
    63
    I ran a Dension GW 100 with my Symphony 2, you get the information from the iPod on the DIS. Still got it somewhere...


    Sent from my iPhone using Tapatalk
     
    Burnsycaz71 likes this.

Share This Page

Do Not Sell My Personal Information