Information - New VW Group Rules for the usage of Used Immobiliser Control Units

[DJAlix]

Due to more stringent security requirements, the service process for installing used immobiliser control units (from February 2021 onwards) has been modified (see list).

• In future, you will need to apply for approval from AUDI AG to install any used immobiliser control units.
• The application is shown automatically when you attempt to adapt the immobiliser control unit using the VW Group tester (or a laptop with VW Group access).
• Print out the application, sign it and send it to the e-mail address given in the application.
• The department in charge of approvals will check that the application is correct and complete.
• You will then receive an e-mail with information regarding the outcome of your application.
• Please note: It may take up to 48 hours before you receive a reply.
• Once approval has been granted, it is only possible to adapt the control unit to the vehicle identification number documented in the application. There is no time limit for doing this.

This currently affects the following control units:

Instrument Cluster

• Audi TT (FV) 2015 >
• Audi A3 (8V/ FF) 2013 >
• Audi Q2 (GA) 2017 >
• Audi Q3 (F3) 2019 >

Convenience System Central Control Unit

• Audi A4 (8K/ FL) 2008 > 2015
• Audi A5 (8T/ FR/ 8F/ FH) 2008 > 2015
• Audi Q5 (8R/ FP) 2009 > 2015
• Audi A6 (4G/ FC) 2011 > 2017
• Audi A7 (4G/ FC) 2011 > 2017
• Audi A8 (4H/ FD) 2010 > 2017
• Audi R8 (FX) 2015 >

This list may be extended to include other control units at any time.