I've got one just not fitted it!
May fit it after I've fitted my h&r roll bars
May fit it after I've fitted my h&r roll bars
It would be ok if you had baby hands or fingers like ET lol
Fitted my rear bar today maybe fit the front tomorrow or Monday. RS4 valve after that!
Meant to say I found h&r arb's delivered from Germany for £308 if anyone's interested
Hope this link works
http://pages.ebay.com/link/?nav=item.view&alt=web&id=141027543104
From ordering until delivery was 1 week, it converts to £295 but paypal charge £13 for currency conversion.
They were delivered by parcelforece and the proper job.
Fitted the front today and I'm very pleased.
RS4 valve tomorrow.
From ordering until delivery was 1 week, it converts to £295 but paypal charge £13 for currency conversion.
They were delivered by parcelforece and the proper job.
Fitted the front today and I'm very pleased.
RS4 valve tomorrow.
I'm going to use a how to from another forum.
If it's any good I'll post the link.
Since I fitted the rear bar yesterday and the front today I'd say the rear made the biggest difference but it's much flatter when cornering and doesn't under steer anymore
Paypal are a joke with charges but the cheapest I could find the bars here were £350 plus delivery with some places charging £395!!
Rear one 40 mins on the floor using axle stands.
Front one on a lift total time 1.5 hours that included re aligning the subframe etc.
I was surprised how easy it was.
MOT Time.............
The old girl went straight through No advisories!!!!!! Always a wait off my mind with it being done at AUDI but I had Mot protection anyway lol!!!!!
More cleaning and some legal German style pressed plates have so improved the look!
Revo Power Stage 2+ is on route too I can not wait hoping everyones planning for there Xmas presents lol!!!!!!
Just reading your post , I just got a 2011 sprint blue sportback s3 And Love it. I to have just got my Revo cai of Pat @LVS Racing .great guy. I to was going to go down the revo route for remap, until I have found a great tuner (tuning Werkes) just round the corner to me so going Apr now, I have noticed they normaly have have a winter software sale in November so holding out hoping for 20% off.
I also love the eibach springs on the front that 1inch drop makes it look so much sweeter.plus I understand it helps handling. Also looking at getting the bilstein b8 sprints from dpm spoke to Damien said he can get the b8 sorted to take the bilstein shocks aswell. And to complete it would like some H&R anti-roll bars.
As for the HPFP I think I'm going to go with pats November deal (great price) .
Also looking at getting the miltek turbo back with black ceramic tips love it, then here come stage2+ .
What mileage was yours when you got it chipped mines 29k at the moment, love your thread keep the good work up.
Dave
Rear one 40 mins on the floor using axle stands.
Front one on a lift total time 1.5 hours that included re aligning the subframe etc.
I was surprised how easy it was.
Eibach produce a pair that have the mounting brackets pre-fitted - I have these on mine.
Fitted my RS4 valve in 1.5 hours!!
The only awkward bit was trying to enter the new one.
I'll post the how to link later as the wife wants to go shopping now
Fitted my RS4 valve in 1.5 hours!!
The only awkward bit was trying to enter the new one.
I'll post the how to link later as the wife wants to go shopping now
Pretty much bang on with the times mateGood job, half hour to get it out and hour to get the new one in!
Can I ask how much it all came to for the clutch, I feel at the moment every day feels like 7 days got the cai fitted, exhaust on order, saving for HPFP , and map, but have just had payout today for some prat clipping me in tesco ,been done today ( see build post for pics) and now after picking up noticed in wet not gripping to well has the Bridgestones on at the moment backs are ok but fronts are wiped out,so do I put two new on front or change all four ?Update time! finally had everything in place and ready and it's AMAZING!!!!!!!!!!!!!!!
TTS Roadsport in Bedford I arrived ................
Autotech HPFP............Check
Milltek full system..........Check
RS4 Fuel pressure Valve.........Check
REVO stage 2+ Map ..............Check
Sach's Organic Clutch kit........Check
LuK New dualmass Flywheel......... check
Arrived early for the clutch to be fitted as its pretty much a days work! So with being the first in as to speak I got to see all the top cars arrive 2x Golf Ed 30 1x Cupra K1 all looked and sounded amazing! All being the technicians cars I knew I was in the best possible hands Shaun who owned the Seat Cupra K1 was left with doing all the work on my S3 ....
A few pics below of there TTRS & if you look over to your right your see the 3 TFSI engined beasties lol!!!
Old Fuel pump and Follower was in great condition so that was good to see!
A random of Me chilling! I took my IPad so was home from home really lol!!!!!!
Gearbox out time ohhhhhh
All going back together !! Getting there now!!
By the time it was all done it was indeed dark so more updates to come but I so Love Stage 2++++++++++++
Nice update mate, glad you got there in the end. You'll love it.
Can I ask how much it all came to for the clutch, I feel at the moment every day feels like 7 days got the cai fitted, exhaust on order, saving for HPFP , and map, but have just had payout today for some prat clipping me in tesco ,been done today ( see build post for pics) and now after picking up noticed in wet not gripping to well has the Bridgestones on at the moment backs are ok but fronts are wiped out,so do I put two new on front or change all four ?
So happy you though
Dave